Main IndexAuto Repair Home Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN




Automotive Repair
Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:   
  Login
  Sign up here!



Latest Forum Post
with_replies.gif image   Lukewarm Heat............
New antifreeze reverse flush heater core...

with_replies.gif image   multiple warning lights
2013 GMC Terrain 130,000 miles 4 cylinde...

with_replies.gif image   2014 Nissan Sentra Shaking
Car recently started shaking when accele...

no_replies.gif image   Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
N/A

hot_with_replies.gif image   1989 toyota pickup 3.0 crank no start
I have a 1989 toyota pickup 3.0 crank no...

with_replies.gif image   Strut spring orientation and strut mount tension nut
2017 Nissan rogue awd 2.5 L Put in Monro...

with_replies.gif image   Transmission stuck in part, I have tried everything
So I'm working on my elderly fathers 201...

with_replies.gif image   2017 dodge journey LED headlights on/off randomly
Year of vehicle 2017 Make of vehicle dod...

with_replies.gif image   Kia Soul starter replacement issues!
Okay so my car is a 2010 Kia soul 2.0 en...

hot_with_replies.gif image   Please Help - Knock sound & engine fail
Hi all, Hoping to get some insight and ...




Dents on sharp bends

Search for (search options)
 



reybo
User

Jan 20, 2018, 3:32 PM

Post #1 of 4 (1759 views)
Dents on sharp bends Sign In
My Honda Element has a 1/2" dish dent on a molded bend. The back is unavailable. I tried the suction cup method but the adhesive supplied refuses to stick to Honda paint. My daughter's new Mazda has two of these in the door. Is there an easy way to suck these small dents out?


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jan 20, 2018, 4:05 PM

Post #2 of 4 (1752 views)
Re: Dents on sharp bends Sign In
If you are trying to use the glue on tabs to pull the dent out, you have to first wash the paint and the tab with alcohol for it to stick.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



reybo
User

Jan 20, 2018, 4:41 PM

Post #3 of 4 (1744 views)
Re: Dents on sharp bends Sign In
In Reply To
If you are trying to use the glue on tabs to pull the dent out, you have to first wash the paint and the tab with alcohol for it to stick.
Thanks. Tried that but no-go. Pulled off before pulling out. My first experience with this technology and I gave up quickly. Do they usually work? Have they sticking power to pull out the dent?


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jan 20, 2018, 4:51 PM

Post #4 of 4 (1741 views)
Re: Dents on sharp bends Sign In
In the right place they do, If there is any kind of shaping or reinforcement, they likely won't. Nothing works everywhere.

The paintless dent pros don't use them much. They rely more on massaging it from the inside.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



(This post was edited by Hammer Time on Jan 20, 2018, 4:52 PM)





 
 
 






Search for (options) Privacy Sitemap