|
|
Small Dents in Rear Quarter Panel and Rear Door Panel
|
|
|
| |
|
fredjohnson
New User
May 2, 2017, 10:17 PM
Post #1 of 6
(1598 views)
|
Small Dents in Rear Quarter Panel and Rear Door Panel
|
Sign In
|
|
I got an estimate to repair the dents shown below. It seemed a bit high so I wanted to see what you guys think. Edit: Vehicle is 2001 Honda Accord. Edit: Sorry, about the image size before.
(This post was edited by fredjohnson on May 3, 2017, 7:54 AM)
|
|
| |
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
May 2, 2017, 11:06 PM
Post #2 of 6
(1585 views)
|
Re: Small Dents in Rear Quarter Panel and Rear Door Panel
|
Sign In
|
|
Your pictures are so wide it's impossible to read. Saw some and is expensive for paint and a fix. What was your quote to fix that? T (BTW - pics will have to go or this thread is unusable. The other thing is "small" dents still require expensive prep, stages of paint in order so time and expense of materials still up there)
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 3, 2017, 4:39 AM
Post #3 of 6
(1573 views)
|
Re: Small Dents in Rear Quarter Panel and Rear Door Panel
|
Sign In
|
|
I deleted your pictures. Please reduce the size before reposting them. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
fredjohnson
New User
May 3, 2017, 6:47 AM
Post #4 of 6
(1561 views)
|
Re: Small Dents in Rear Quarter Panel and Rear Door Panel
|
Sign In
|
|
Quote was about $1150 with a $85/hr labor rate.
|
|
| |
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
May 3, 2017, 7:00 AM
Post #5 of 6
(1559 views)
|
Re: Small Dents in Rear Quarter Panel and Rear Door Panel
|
Sign In
|
|
Can only be IMO that's about what I'd expect if YOU didn't insist on all new parts. Not knowing what this vehicle is doesn't help and still needs the in person inspection. I question how hard the wheel lip molding will be to fix or replace such that the air gap is back to normal? Hammer Time can tell you how expensive just plain products and paints are if you have a quote in writing you see that now, T
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 3, 2017, 7:25 AM
Post #6 of 6
(1553 views)
|
Re: Small Dents in Rear Quarter Panel and Rear Door Panel
|
Sign In
|
|
That hourly rate is pretty high for body work. Most are in the $50-$60 range. Mechanical hourly rates are much higher. As Tom inferred, the cost of quality paint can be outrageous. My shop used Dupont products and it was not unusual for paint materials to cost a couple hundred dollars just to paint a bumper, even with the shop mixing their own colors. Also, that door has to come off and be completely stripped of internal parts to be repaired. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
(This post was edited by Hammer Time on May 3, 2017, 7:27 AM)
|
|
| |
|