|
|
Replacement rear ABS sensor tight fit
|
|
|
| |
|
naphelge
New User
Nov 4, 2022, 3:18 PM
Post #1 of 4
(1402 views)
|
Replacement rear ABS sensor tight fit
|
Sign In
|
|
2015 Chevy Traverse 6 cyl 25k km I am replacing the ABS speed sesnor, rear side driver side, and I got the old sensor out, cleaned the hole where the sensor goes, but when I try to drop the new sensor in the fit seems excessively tight. Moderate pushing pressure does not seem to get the sensor down into the hole. I looked, and the sensor does not appear to be keyed. So before I use more than moderate pushing pressure on this delicate looking sensor, I just wanted to see if replacing an ABS speed sensor generally requires a good amount of pushing force to get it seated in the hole? Thanks.
(This post was edited by naphelge on Nov 4, 2022, 3:19 PM)
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 4, 2022, 3:32 PM
Post #2 of 4
(1397 views)
|
Re: Replacement rear ABS sensor tight fit
|
Sign In
|
|
No, it should not be that tight. Sometimes coming out is hard but going in should not be. Match it with the old one and see if they are the same diameter. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
naphelge
New User
Nov 4, 2022, 4:31 PM
Post #3 of 4
(1391 views)
|
Re: Replacement rear ABS sensor tight fit
|
Sign In
|
|
Thanks for the reply. It was the correct sensor. It was the same as the one I took out. I added a little grease to the inside of the hole and tapped the sensor into place with some light hammer taps on a punch against the mounting plate of the sensor.
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 4, 2022, 4:45 PM
Post #4 of 4
(1384 views)
|
Re: Replacement rear ABS sensor tight fit
|
Sign In
|
|
If it's in now and working, great but I would never hit a sensor with a hammer ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|