Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

2000 Sable making noise when turing steering Wheel


  Email This Post



Rick57
New User

Oct 23, 2008, 4:44 PM

Post #1 of 7 (5748 views)
2000 Sable making noise when turing steering Wheel Sign In

2000 Mercury Sable
78K
3.0 DOHC

I know this is suspension but its front wheel drive and I am sure this will not be easy. But here it is:

When I turn the steering wheel left/right it does not matter, it makes a squeel noise, almost like a moan if you know what I mean. Now this happens when I am at a dead stop or moving slow like backing up or just pulling away. It is very loud. It seems to drive and steer fine going down the road.

Any ideas?

Thanks,
Rick


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Oct 23, 2008, 7:58 PM

Post #2 of 7 (5741 views)
Re: 2000 Sable making noise when turing steering Wheel Sign In

Did I just see that this can make this "squeel/moan" when at a dead stop? That takes the FE parts and brakes out of it and would lead me to belt, belt tension issue - the load of steering is greatest stopped or slow driving and PS pump is probably slipping making the noise.

Moan is more like low PS fluid level. Check that AND belt tension. Tensioner may be bad or belt stretched to limit of range is my best guess with the info,

T

Ps: Simple belt tension test is to see if you can spin alternator by fins - shouldn't be able to easily or at all. Some alts don't have fins so just pick long stretch between pulleys to feel lash/deflection of belt. Engine off - keys out please!



Rick57
New User

Oct 24, 2008, 3:19 AM

Post #3 of 7 (5733 views)
Re: 2000 Sable making noise when turing steering Wheel Sign In

It makes the noise at a dead stop yes, only when I turn the wheels in either direction and with the engine off. I just tried that. I can sit in the car with no engine on and turn the steering wheel and it makes the same noise.

Thanks,
Rick


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Oct 24, 2008, 4:08 AM

Post #4 of 7 (5731 views)
Re: 2000 Sable making noise when turing steering Wheel Sign In

Ok - forget the belt for this for now. Engine off + noise takes the whole engine out of the picture. You have some part that's dry of grease/lubrication in the steering - duh - and near impossible to pin down from here. You could try hoisting front wheels and turning wheels - listen and check all the front end parts - ball joints, tie rod ends, rack, for anything. Is there a chance you are hearing this noise from the steering column? Some make some plastic to plasic or metal noise between parts that turnwith the wheel and the stationery ones like the housing for the key. Could also be turn signal or other internal parts unseen in column??

T



NJ___Jon
Novice

Apr 18, 2009, 7:02 PM

Post #5 of 7 (5437 views)
Re: 2000 Sable making noise when turing steering Wheel Sign In

Regaurdless I would check the power steering fluid.


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Apr 20, 2009, 9:54 AM

Post #6 of 7 (5431 views)
Re: 2000 Sable making noise when turing steering Wheel Sign In

Jon- Look at the date - Hope this is solved by now,

T



Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Apr 25, 2009, 5:48 AM

Post #7 of 7 (5406 views)
Re: 2000 Sable making noise when turing steering Wheel Sign In

I have run across a problem like this on Taurus/Sables a couple times before. It turned out to be bad upper strut turn plates.
The solution will be new strut plates but I would also replace the struts at the same time.
That should solve your problem.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.







  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap