Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Banging in Ford Ranger


Search for (search options)
 



zmasterflex
User

Sep 15, 2008, 9:51 AM

Post #1 of 4 (2146 views)
Banging in Ford Ranger Sign In

Greetings all. 1995 Ford Ranger 2.3L rear wheel drive. While accelerating the car sort of bangs and shakes at different points. It doesn't feel like the transmission is doing it, i was told it was the driveshaft. Is the sort of thing that a DIYer with tools can replace himself, or do I need special equipment? Furthermore, if it's the rear end and not the actual shaft, is that something that I can remove -the rear axles are under alot of torque- without an impact wrench? I'm looking to buy this car for I am on a student budget, hoping not to get killed on repair costs. Thanks for looking.


way2old
Veteran / Moderator
way2old profile image

Sep 15, 2008, 4:37 PM

Post #2 of 4 (2142 views)
Re: Banging in Ford Ranger Sign In

Call your local Ford dealer. I think(not sure)there was a TSB on that problem. If I remember it was for the front yoke on the driveshaft causing the problem. Like I said, I am not sure so call the dealer and ask.



Being way2old is why I need help from younger minds


zmasterflex
User

Sep 16, 2008, 6:19 AM

Post #3 of 4 (2135 views)
Re: Banging in Ford Ranger Sign In

Thanks for the quick response. After checking carfax, it has been found that the car was used commercially by two different companies. Presumably the car hasn't been driven with banging the last 130k miles. I am curious if there is any way to check which part of the drivetrain is causing the problem. A) is there any website or posting which has a diagram of a rear wheel drive drivetrain with labeled parts such as driveshaft, UV joint, yolk etc. B) is there any way that a layman like me can look underneath and see which part needs replacement without having a mechanic tell me.
Also the shift "rod" is very tight to pull into and out of park, i was told it's normal on Ford's that the bushings wear out. Does this sound right?
Thanks so much


way2old
Veteran / Moderator
way2old profile image

Sep 16, 2008, 2:26 PM

Post #4 of 4 (2131 views)
Re: Banging in Ford Ranger Sign In

Click right here. There is information and diagrams on that site. The links to the right will give more detailed diagnostics and repairs. Good luck.
The tight shifting is not normal. Is the shifter loose? If it is, then the bushings may be worn. Possibly the bolts that hold the cable to the bottom of the shift rod in the cable. Also the cable might be rusted inside and need the shift cable replaced. Let us know.



Being way2old is why I need help from younger minds






 
 
 






Search for (options) Privacy Sitemap