|
|
|
Exhust Maifold Quacking at Me
|
|
|
| |
|
|
james245
New User
Nov 24, 2017, 12:32 PM
Post #1 of 5
(1452 views)
|
Exhust Maifold Quacking at Me
|
Sign In
|
|
2005 Chevy Malibu
120K
https://vocaroo.com/i/s1SsBMAN1OUV
(Link goes to mp3 file recording of engine.)
It sounds like ducks to me! Could be a rubbing sound. Recording device is located directly over exhaust manifold cover @ rear of engine between engine and firewall. It is not serpentine belt (my first thought) and both alternator and water pump are in front of engine. It could be something underneath manifold or emanating from engine itself but it doesn't sound like it comes from within engine. The engine sound in file sounds normal. It usually--but not always--goes away after engine idles for 15-20 minutes and the sound is much worse when engine is cold. It is difficult to hear when car is in gear so I'm not sure if it transmission related or not.
Any insight is welcomed.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 24, 2017, 2:11 PM
Post #2 of 5
(1443 views)
|
|
Re: Exhust Maifold Quacking at Me
|
Sign In
|
|
Sounds like a dry bearing is something, possibly the alternator.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Nov 25, 2017, 12:07 PM
Post #4 of 5
(1404 views)
|
|
Re: Exhust Maifold Quacking at Me
|
Sign In
|
|
Again, it sounds like a dry bearing in something so get a stethoscope and start touching it to things until you find it. We can't find it from here.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Nov 25, 2017, 1:32 PM
Post #5 of 5
(1399 views)
|
|
Re: Exhust Maifold Quacking at Me
|
Sign In
|
|
Quote OP ">It sometimes comes back after reducing it to idle, sometimes not.<"
Just ideas for now: Take the belt off only long enough WHILE this happens see if it's gone.
I'm just thinking of a couple plain rubber serpentine belts that couldn't be shut up for love nor money either right away new or used! One sounded like the whole vehicle was making noises from who knows where.
Most if sprayed with water or IMO better WD-40 shouldn't harm a rubber belt if belt 99% shut up for a short while totally.
Look at alignment of belt on the items including the harmonic balancer (bottom one) that's it's in line with all the others. Does it wobble on any pulley?
This is easy to rule out. If all good and really a bearing find it any which way as they don't heal and if the wrong one totally failed till something fell off unknown damage if a belt flapping around wildly,
T
|
|
| |
|
| | |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
