|
|
RichardGilpin
User
Jun 15, 2012, 11:07 AM
Post #1 of 22
(2510 views)
|
car noise
|
|
|
2006 dodge ram 2500 w/ cummins deisel engine. i hear a high pitch noise like a loose belt when I accelerate. never did this before until after i changed the transmission filter and fluid.
|
|
| |
|
|
kensoncustom
User
Jun 15, 2012, 11:51 AM
Post #2 of 22
(2493 views)
|
|
Re: car noise
|
|
|
did the filter look the same as the one you took out they have a deep pan filter and a short pan filter.do you have gasket instaled properly?sounds a restriction
|
|
| |
|
|
RichardGilpin
User
Jun 15, 2012, 12:14 PM
Post #3 of 22
(2479 views)
|
|
Re: car noise
|
|
|
yes, I compared the old filter to the new one, and they matched. the gasket installed correctly. I was thinking about changing the filter again.
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
Jun 18, 2012, 5:56 PM
Post #4 of 22
(2411 views)
|
|
Re: car noise
|
|
|
Did you change the fluid as routine maintenance or was this acting up a bit and you thought a fluid change would help?
|
|
| |
|
|
RichardGilpin
User
Jun 18, 2012, 6:22 PM
Post #5 of 22
(2400 views)
|
|
Re: car noise
|
|
|
I changed the filter as routine maintanence, and also because it felt like the transmission was slipping when I turn a corner and accelerated, like maybe it was low on fluid.
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Jun 18, 2012, 6:30 PM
Post #6 of 22
(2392 views)
|
|
Re: car noise
|
|
|
It probably would've been a good idea to check the fluid level before you did the service just to verify if this was a low fluid problem or something more serious.
Tranny services like any other service is to be done as maintenance and not to correct a problem. With transmissions, if you let the maintenance go to a point where you are getting shifting issues. You've done serious damage to the tranny and it doesn't have long to live, even if the service has seemed to "help".
Now if it was just low, that would actually be a better thing but the leak would definitely need to be fix......
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jun 18, 2012, 6:37 PM
Post #7 of 22
(2379 views)
|
|
Re: car noise
|
|
|
Did you use ATF+4 fluid? Fluid level has to be checked with the fluid warmed up and the transmission in neutral with the engine running.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Jun 18, 2012, 6:39 PM)
|
|
| |
|
|
RichardGilpin
User
Jun 18, 2012, 6:41 PM
Post #8 of 22
(2373 views)
|
|
Re: car noise
|
|
|
no I did not change the oil cooler filter, only the transmission filter. there were no signs of any leaks. I was overseas for about a year and the truck stayed parked in the driveway. I had a family member start my truck about once a week and let it run for awhile just to keep the battires charged. when i returned from overseas and started driving again thats is when it felt like it was slipping when i turned a corner and accelerated. it would not slip from a normal stop and go, only when cornering.
|
|
| |
|
|
RichardGilpin
User
Jun 18, 2012, 6:43 PM
Post #9 of 22
(2371 views)
|
|
Re: car noise
|
|
|
yes, i used the atf+4 synthetic that it calls for.
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Jun 18, 2012, 6:49 PM
Post #10 of 22
(2366 views)
|
|
Re: car noise
|
|
|
Sitting can be very hard on a vehicle. It's good you were having it started but it's still not the same as driving it....
I'm guessing that you weren't way over on the mileage for the service and it may just be a seal getting hard and no sealing correctly. 1 year isn't a killer & hopefully the service & driving it again will take care of the shifting issue....
Is the noise still there? You may want to see if you can duplicate the noise while the truck is sitting still so you can trace down where it is coming from....It very well could be a belt. Rubber parts & the exhaust take sitting the hardest...
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jun 18, 2012, 6:56 PM
Post #11 of 22
(2356 views)
|
|
Re: car noise
|
|
|
Sorry I made a boo boo post earlier. 48RE doesn't use an oil cooler filter even though the TSBs in the 48RE section were for the 45RFE / 545RFE.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Jun 18, 2012, 6:56 PM)
|
|
| |
|
|
RichardGilpin
User
Jun 18, 2012, 6:58 PM
Post #12 of 22
(2353 views)
|
|
Re: car noise
|
|
|
yes the noise is still there. it will not make the noise when it is sitting still. i have revved up the engine in park and also in nuetral but it does not make the noise. it only makes the noise when i aacelerate, especially if i go to get on the freeway. it does not slip only makes that high pitch noise
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jun 18, 2012, 7:03 PM
Post #13 of 22
(2351 views)
|
|
Re: car noise
|
|
|
Does it make the noise if you brake torque it?
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
RichardGilpin
User
Jun 18, 2012, 7:04 PM
Post #14 of 22
(2348 views)
|
|
Re: car noise
|
|
|
cant say for sure what type of transmission I have, but I was thinking it was the 44RE. the truck is a 2006 dodge ram 2500 mega-cab with the cummins diesel.
|
|
| |
|
|
RichardGilpin
User
Jun 18, 2012, 7:07 PM
Post #15 of 22
(2345 views)
|
|
Re: car noise
|
|
|
yes it does. it almost sounds like a dry bearing in the turbo.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jun 18, 2012, 7:10 PM
Post #16 of 22
(2342 views)
|
|
Re: car noise
|
|
|
It's definitely not the 44RE. It's a 48RE.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jun 18, 2012, 7:12 PM
Post #17 of 22
(2335 views)
|
|
Re: car noise
|
|
|
If your brake torquing it and it is making the noise, you could have a torque converter problem if the noise is coming from the transmission. I'd run it to a transmission shop and let them have a listen.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Jun 18, 2012, 7:14 PM)
|
|
| |
|
|
RichardGilpin
User
Jun 18, 2012, 7:17 PM
Post #18 of 22
(2327 views)
|
|
Re: car noise
|
|
|
sounds like the logical thing to do at this point. Thanks for your input.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jun 18, 2012, 7:19 PM
Post #19 of 22
(2324 views)
|
|
Re: car noise
|
|
|
Let us know how things go. 
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
RichardGilpin
User
Jun 18, 2012, 7:20 PM
Post #20 of 22
(2320 views)
|
|
Re: car noise
|
|
|
ok
|
|
| |
|
|
mmiigu
New User
Jul 15, 2012, 2:21 AM
Post #21 of 22
(2220 views)
|
|
Re: car noise
|
|
|
hii iam new user
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jul 15, 2012, 4:36 AM
Post #22 of 22
(2206 views)
|
|
Re: car noise
|
|
|
NOOOOOO...... you are an ex-spammer and gone
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
