|
|
Joe C
New User
Aug 3, 2010, 9:01 AM
Post #1 of 8
(6019 views)
|
|
Dash light in car radio
|
Sign In
|
|
I have a 99 Ford Explorer with a AM/FM stereo with Single Disc CD player that works great except the light showing the time or station does not work. I can't figure out how to get to it (I pulled it from the dash) to see if it is a wire bulb or LED light. Any suggestions?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 3, 2010, 9:15 AM
Post #2 of 8
(6012 views)
|
|
Re: Dash light in car radio
|
Sign In
|
|
It's an LCD display and they go bad. It's not really worthwhile to try to repair it. Replacing it with an aftermarket radio would be the most efficient way to resolve it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
kenray
User
Aug 3, 2010, 9:34 AM
Post #3 of 8
(6006 views)
|
|
Re: Dash light in car radio
|
Sign In
|
|
not really knowing exactly which radio you have, it's a good possibility you may have bad solder connections on the switch board.
|
|
| |
|
|
Joe C
New User
Aug 3, 2010, 12:25 PM
Post #4 of 8
(6000 views)
|
|
Re: Dash light in car radio
|
Sign In
|
|
Thanks for your reply, that's what I figured.
|
|
| |
|
|
Joe C
New User
Aug 3, 2010, 12:27 PM
Post #5 of 8
(6000 views)
|
|
Re: Dash light in car radio
|
Sign In
|
|
Thanks for your reply. Where is the switch board?
|
|
| |
|
|
bobkerry
New User
Aug 4, 2010, 7:04 AM
Post #6 of 8
(5992 views)
|
|
Re: Dash light in car radio
|
Sign In
|
|
hey there might be some problem with your radio..i would recommend you to check it properly may be wires are mis connected or are not placed properly...this is not a big issue and this will be sorted out easily
|
|
| |
|
|
kenray
User
Aug 5, 2010, 9:55 AM
Post #8 of 8
(5973 views)
|
|
Re: Dash light in car radio
|
Sign In
|
|
is the radio cd and radio only or cd and tape deck. also, is the radio din sized or din and a half????????? if it is cd only and din and a half, the switch board is the face board where all the switches are. there are usually a couple surface mount resistors that develope bad solder connections.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
