|
|
|
03 Dodge Ram Van-no brake lights
|
|
|
| |
|
|
larrya235
New User
Sep 27, 2009, 2:10 PM
Post #1 of 6
(4827 views)
|
|
03 Dodge Ram Van-no brake lights
|
Sign In
|
|
I have no power to the brake switch and the brake lights. Turn signals and lights in rear of vehicle work, but no brake lights.Can you help? Cannot find a fuse
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 27, 2009, 3:21 PM
Post #2 of 6
(4821 views)
|
|
Re: 03 Dodge Ram Van-no brake lights
|
Sign In
|
|
You should have power at the pink with Dk blue wire at the switch.
If you don't have power there, then use a testlight to test every fuse both under the dash and in the engine compartment.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Sep 27, 2009, 3:46 PM
Post #3 of 6
(4816 views)
|
|
Re: 03 Dodge Ram Van-no brake lights
|
Sign In
|
|
On the money as usual Hammer!
I'm not so good at Mopars but there was a whole bunch of Fords where they didn't use enough wire to the swtich and the wires would pull out if and when pedal went low for any reason - even normal range brake wear?? Worth a check,
T
|
|
| |
|
|
DanD
Veteran
/ Moderator
Sep 28, 2009, 5:10 AM
Post #4 of 6
(4808 views)
|
|
Re: 03 Dodge Ram Van-no brake lights
|
Sign In
|
|
The fuse you’re looking for is in the under hood power distribution centre, near the battery.
The brake light fuse is in passion #4, a 20 amp fuse.
Like what Hammer time said check it with a test light; making sure the light will light on both sides of the fuse.
Also check the fuse for power with the brakes applied. I have had connection problems inside these distribution centers; that the circuit will go open (no connection) when there’s a load applied.
Dan.
Canadian "EH"
|
|
| |
|
|
larrya235
New User
Sep 29, 2009, 6:06 PM
Post #5 of 6
(4796 views)
|
|
Re: 03 Dodge Ram Van-no brake lights
|
Sign In
|
|
Thanks to Hammer Time, I was able to trace the correct wire back to the fuse box and even though the fuse looked good, it did not have continuity. I replaced the fuse and the problem was fixed. So thanks again. Larry
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 29, 2009, 6:09 PM
Post #6 of 6
(4792 views)
|
|
Re: 03 Dodge Ram Van-no brake lights
|
Sign In
|
|
Glad to hear you found it. Thanks for reporting back with the results.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
