Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









1986 isuzu II starter switch


Search for (search options)
 



taylortbutts
New User

Dec 10, 2008, 9:48 AM

Post #1 of 3 (1317 views)
1986 isuzu II starter switch Sign In

1986 Isuzu trooper II 2.3 , 224,000mi.
Had starter bench tested, checks ok. Wire leading from ignition to starter reads 13.5v. but won't turn over starter. If jumped from battery to starter it works fine. Not enough amps into starter? Need bigger guage wire? thanks


Loren Champlain Sr
Veteran / Moderator
Loren Champlain Sr profile image

Dec 10, 2008, 6:01 PM

Post #2 of 3 (1310 views)
Re: 1986 isuzu II starter switch Sign In

The large wire (battery cable) will show battery voltage, of course. You need to see if you are getting 12V to the small (exciter) wire with the ign. switch in the crank (start) mode.
Loren
SW Washington


taylortbutts
New User

Dec 11, 2008, 5:40 AM

Post #3 of 3 (1305 views)
Re: 1986 isuzu II starter switch Sign In

Yes the primary is hot 12v. It's the exiciter that I was refering to in my post. With the ignition switch turned on, the exiciter wire is hot also 12v. Still it does'nt have enough something to throw the starter. Thanks






 
 
 






Search for (options) Privacy Sitemap