|
|
amberrose
New User
Apr 28, 2010, 6:58 PM
Post #1 of 9
(2619 views)
|
|
1997 chrysler cirrus
|
Sign In
|
|
where is the valet/overide button located?
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Apr 28, 2010, 7:07 PM
Post #2 of 9
(2614 views)
|
|
Re: 1997 chrysler cirrus
|
Sign In
|
|
There isn't a valet override button on that car......
Is there a problem with the alarm you are having????
|
|
| |
|
|
amberrose
New User
Apr 28, 2010, 7:09 PM
Post #3 of 9
(2609 views)
|
|
Re: 1997 chrysler cirrus
|
Sign In
|
|
yes i am it started going off and i don't have a remote to it. what should i do? it kills the car
(This post was edited by amberrose on Apr 28, 2010, 7:11 PM)
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Apr 28, 2010, 7:18 PM
Post #4 of 9
(2604 views)
|
|
Re: 1997 chrysler cirrus
|
Sign In
|
|
It depends on if it's a factory alarm or aftermarket.
It it's a factory alarm, on some of those if you use the key to lock & then unlock the drivers door it will disarm it. Also using the power lock button to lock & unlock it will sometimes work. You can also try this on the passenger door....
If it's a aftermarket system. There is usually a button or switch that is installed somewhere under the dash but i would depend on what type of system.......
If it's a factory system it will have a chrysler emblem on the key fob........
|
|
| |
|
|
amberrose
New User
Apr 28, 2010, 7:22 PM
Post #5 of 9
(2602 views)
|
|
Re: 1997 chrysler cirrus
|
Sign In
|
|
what is a fob?
And the horn goes off and there is a light on the dash so it's factory.
We already tried that and it didn't work and the remote dosn't work....
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Apr 28, 2010, 7:40 PM
Post #6 of 9
(2600 views)
|
|
Re: 1997 chrysler cirrus
|
Sign In
|
|
If there is a red led on the dash & no Chrysler emblem on the fob (remote) then it's an aftermarket system.
The door lock should've disabled a factory system....
After thinking about this for a bit, there is a method I use to disable am systems with no fob. I am leary about posting it due to the risk of damaging other systems..... I've never had a problem with it but the risk is still there.....
After I'm sure you've read this, I will pm you the method because I don't want it posted in the open forum. I normally don't respond to pm's
This is TRY AT YOUR OWN RISK! and understand there is a risk of damaging other electrial systems and is not guaranteed to work....
|
|
| |
|
|
amberrose
New User
Apr 28, 2010, 7:47 PM
Post #7 of 9
(2598 views)
|
|
Re: 1997 chrysler cirrus
|
Sign In
|
|
OK THANK-YOU SO MUCH!!!!!
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Apr 29, 2010, 12:49 PM
Post #8 of 9
(2586 views)
|
|
Re: 1997 chrysler cirrus
|
Sign In
|
|
How about CCing that procedure to me too. I don't have one for Chrysler.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Apr 29, 2010, 10:27 PM
Post #9 of 9
(2580 views)
|
|
Re: 1997 chrysler cirrus
|
Sign In
|
|
Done
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
