|
|

crmyers
New User
Jul 29, 2007, 3:11 PM
Post #1 of 5
(1575 views)
|
2000 Sable cooling fan
|
Sign In
|
|
When relays are energized all three wires to the fan motor are hot. Can not get a ground on any of the wires. Fan motors are no good but if the wiring is messed up I'm afraid to put in new motors. Need help.
|
|
|  |
|

way2old
Veteran
/ Moderator

Jul 29, 2007, 4:52 PM
Post #2 of 5
(1573 views)
|
Re: 2000 Sable cooling fan
|
Sign In
|
|
Arte you checking the wires with the connector unplugged? If yes, one of the power wires has shorted to the ground wire. If it is being checked with the fan plugged in, the fan is probably the cause.
Being way2old is why I need help from younger minds
|
|
|  |
|

crmyers
New User
Jul 29, 2007, 5:06 PM
Post #3 of 5
(1571 views)
|
Re: 2000 Sable cooling fan
|
Sign In
|
|
Wires were checked with plugs off of motors. Do you know where the ground wire terminates?
|
|
|  |
|

way2old
Veteran
/ Moderator

Jul 30, 2007, 6:41 PM
Post #4 of 5
(1570 views)
|
Re: 2000 Sable cooling fan
|
Sign In
|
|
G105 engine compartment, front, RH side G102 engine compartment, rear, RH side Those are the 2 grounds that are on the cooling fan circuits. The ground is a black wire. Good luck. Wish I could be more specific. Just look for some wires that are bolted to the body.
Being way2old is why I need help from younger minds
|
|
|  |
|

crmyers
New User
Jul 31, 2007, 8:01 AM
Post #5 of 5
(1568 views)
|
Re: 2000 Sable cooling fan
|
Sign In
|
|
Thanks for the help.
|
|
|  |
|