Main IndexAuto Repair Home Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN




Automotive Repair
Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:   
  Login
  Sign up here!



Latest Forum Post
with_replies.gif image   Lukewarm Heat............
New antifreeze reverse flush heater core...

with_replies.gif image   multiple warning lights
2013 GMC Terrain 130,000 miles 4 cylinde...

with_replies.gif image   2014 Nissan Sentra Shaking
Car recently started shaking when accele...

no_replies.gif image   Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
N/A

hot_with_replies.gif image   1989 toyota pickup 3.0 crank no start
I have a 1989 toyota pickup 3.0 crank no...

with_replies.gif image   Strut spring orientation and strut mount tension nut
2017 Nissan rogue awd 2.5 L Put in Monro...

with_replies.gif image   Transmission stuck in part, I have tried everything
So I'm working on my elderly fathers 201...

with_replies.gif image   2017 dodge journey LED headlights on/off randomly
Year of vehicle 2017 Make of vehicle dod...

with_replies.gif image   Kia Soul starter replacement issues!
Okay so my car is a 2010 Kia soul 2.0 en...

hot_with_replies.gif image   Please Help - Knock sound & engine fail
Hi all, Hoping to get some insight and ...




2007 Endeavor window problem

Search for (search options)
 



jrhorton
Novice

Feb 5, 2016, 5:58 PM

Post #1 of 3 (1258 views)
2007 Endeavor window problem Sign In
2007 Mitsubishi Endeavor AWD, 3.7L, 120k miles. The windows are not opening/closing properly with the master window switch. Sometimes the windows work from the master switch with the driver door closed, other times the windows work with the door open. Sometimes only the driver window works using the master switch, and sometimes only the other windows work. Sometimes the windows don't work with the door open or closed. I installed another master switch and the results are the same. Crazy Does this sound like the wiring from the door to the body? Thanks.


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Feb 6, 2016, 1:21 AM

Post #2 of 3 (1240 views)
Re: 2007 Endeavor window problem Sign In
That sounds like a problem usually from a door used a lot or older than this but was frequently the beginning of a break in wire inside insulation of wires that run thru the door jam where they bend. Usually driver's door too so it matches.
Verify by wiggle testing any snorkel in door jam with it open to make it happen or correct. Then if so wire by wire you need to check for continuity just color for color from inside door to inside vehicle and run a new wire of proper automotive grade to splice in.


It can be a pest to expose wires and snake thru wire thru that snorkel. Check if you verify that is the problem if a new harness is practical. Most it's just a wire or two,


T



nickwarner
Veteran / Moderator
nickwarner profile image

Feb 6, 2016, 1:36 AM

Post #3 of 3 (1237 views)
Re: 2007 Endeavor window problem Sign In
With Tom on this one. Thanks for giving us the right info. Just by moving the door, you change to issue the car is having. So time to have the real lack of fun in finding he junk wire.

Think of the wires like a beer can. You can bend it back and forth so many times then it starts to break. Bend it long enough and only a small bit is left. So the multiple strand wire breaks enough strands that it cannot do its job, and its at the pivot point where it breaks. A wiggle test with a multimeter tells the tale.





 
 
 






Search for (options) Privacy Sitemap