|
|
2012 Hyundai Veloster Heat Issues.
|
|
|
| |
|
Krusty_Socks
New User
Oct 25, 2019, 4:43 PM
Post #1 of 4
(1767 views)
|
2012 Hyundai Veloster Heat Issues.
|
Sign In
|
|
So I have a 2012 Hyundai Veloster, 1.6L DOHC GDI Motor with just above 60k on it. I have no heat, the dial that controls the speed of heat/AC does nothing. I did a little digging around yesterday and noticed my Resistor was all nice and rusty crusty, then my Co Worker, slim, took a quick peek at it and came to the conclusion that my Resistor is not getting enough ground, so I spliced a wire into the ground wire, grounded it off, then spliced a toggle switch into that wire so I can turn it on and off, and it works for the time being, should I take a further look into the blower motor, connections for the heat/AC controls, im not sure how to go on with this. Im not a diagnosing electrical type of guy. EDIT: I did add a 12 inch subwoofer, which I had to wire up a input line converter, I think its called, for RCAs since my OEM head unit does not have RCA ports. I wired it up to the OEM Amplifier that's underneath the passenger side front seat. Thanks.
(This post was edited by Krusty_Socks on Oct 25, 2019, 4:45 PM)
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Oct 25, 2019, 5:39 PM
Post #2 of 4
(1743 views)
|
Re: 2012 Hyundai Veloster Heat Issues.
|
Sign In
|
|
The ground is what the circuit uses to switch on/off and select speeds. You need to fix this right. It's likely just a bad resister which is cheap. If you keep up this Fintstone style wiring you could find yourself doing serious damage. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Krusty_Socks
New User
Oct 26, 2019, 1:32 AM
Post #3 of 4
(1717 views)
|
Re: 2012 Hyundai Veloster Heat Issues.
|
Sign In
|
|
I did put a new resistor in, does nothing.
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Oct 26, 2019, 4:14 AM
Post #4 of 4
(1709 views)
|
Re: 2012 Hyundai Veloster Heat Issues.
|
Sign In
|
|
That's why you test things before replacing parts. You have to test for ground signals arriving from the switch at various speeds. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|