Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









70 chevelle resistance wire help.


Search for (search options)
 



charrger
New User

Apr 20, 2010, 4:30 PM

Post #1 of 4 (3487 views)
70 chevelle resistance wire help. Sign In

my question is i have a 70 chevelle and need to replace the resistance wire from fuse block to coil. does any one no whitch exact wire type i need and any good places to order it. Thanks.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Apr 20, 2010, 5:33 PM

Post #2 of 4 (3485 views)
Re: 70 chevelle resistance wire help. Sign In

You may have a real hard time looking for one of those these days. You might do better using a porcelain resister or a coil with internal resister. I think the best bet would be an electronic ignition conversion.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



Sidom
Veteran / Moderator
Sidom profile image

Apr 20, 2010, 8:02 PM

Post #3 of 4 (3479 views)
Re: 70 chevelle resistance wire help. Sign In

I'll have to 2nd the suggestion.......... Put a factory HEI distributor in that....All you need is one 12v power wire and you good to go, hotter spark and way less maintenance......... I'm assuming this is a small block V8. It'll drop right in.


(This post was edited by Sidom on Apr 20, 2010, 8:02 PM)


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Apr 21, 2010, 6:16 AM

Post #4 of 4 (3471 views)
Re: 70 chevelle resistance wire help. Sign In

Like the HEI switch over idea. To add if a V8 small block to get one (whole distributor) that would fit early HEIs with vacuum advance. With MY (model year) 1975 and up GM went pointless (pun intendedWink)

Truck engines hung on longer to the vacuum advance types TMK. If memory serves me which can be a challenge the orange wire is plain power to dist, brown is for tach if equipped or testing and the other should be ground? Been a while,

T

Vacuum for advance may be "venturi" air speed or manifold vacuum but most were venturi air speed meaning vacuum would only show up with RPMs not at idle if I recall?







 
 
 






Search for (options) Privacy Sitemap