|
|
77 el camino no turn signals
|
|
|
| |
|
elcaminopeter
Novice
Jun 24, 2013, 1:18 AM
Post #1 of 6
(1797 views)
|
77 el camino no turn signals
|
Sign In
|
|
Okay a while back I had an issue with the anti theft so I removed the safety switch but since then I have not been able to get power to signals. Altho headlight and markers come on but signals will not awork. Brake lightig works. Fuses are fine. I'm thinking there is no power goin to the column. But I don't wanna send off any power to any wires since I've recently fried my car lighter circuit and now facing I'm facing his dilemma to even mess wit. If someone could just point me in the right direction of where to start it would be much appreciated
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jun 24, 2013, 11:45 AM
Post #2 of 6
(1763 views)
|
Re: 77 el camino no turn signals
|
Sign In
|
|
Have you tested the flasher? Do the hazards work? Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Jun 24, 2013, 11:50 AM)
|
|
| |
|
elcaminopeter
Novice
Jun 25, 2013, 6:06 AM
Post #3 of 6
(1749 views)
|
Re: 77 el camino no turn signals
|
Sign In
|
|
I've got nor horn, hazards or flashers...but I do have head and tail lighting
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jun 25, 2013, 4:25 PM
Post #4 of 6
(1728 views)
|
Re: 77 el camino no turn signals
|
Sign In
|
|
You have a volt meter or a 12 volt test lamp and wiring diagram? If you know how to check electrical circuits, you could isolate the problem area. Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Jun 25, 2013, 4:39 PM)
|
|
| |
|
elcaminopeter
Novice
Jun 25, 2013, 9:11 PM
Post #5 of 6
(1720 views)
|
Re: 77 el camino no turn signals
|
Sign In
|
|
Well unfortunately my test light messed up on me so I went and made one with a regular turn signal light and added two hot wires and a ground so now I could check and see if two circuits got fire or not? So what should I do to isolate if i seem to understand there is no fire coming from the steering wheel?
|
|
| |
|