|
|
86 Bronco II Can't Engage 4WD
|
|
|
| |
|
14CGasparlin
New User
Aug 26, 2012, 11:17 AM
Post #1 of 9
(2230 views)
|
86 Bronco II Can't Engage 4WD
|
Sign In
|
|
Hi again, I have an Electronic Shift Motor on a Borg-Warner 13-50 Transfer case. A few months ago it stopped working. So, I took the shift motor off, and since it was still under warranty took it to AutoZone to have them check it out. They checked it out, and they said that it still works. The button works, I know this because I've tested it with a test light. So there's gotta be a relay or something somewhere that has to do with this. But I can't find ANY Wiring diagrams related to it in my Chilton. Anyone else had an issue like this? Or can offer any help? Thanks in Advance, Cullen
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 26, 2012, 11:39 AM
Post #2 of 9
(2221 views)
|
Re: 86 Bronco II Can't Engage 4WD
|
Sign In
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Aug 26, 2012, 4:48 PM
Post #3 of 9
(2191 views)
|
Re: 86 Bronco II Can't Engage 4WD
|
Sign In
|
|
I didn't know that Autozone had the capabilites of testing something like that. Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 26, 2012, 4:51 PM
Post #4 of 9
(2187 views)
|
Re: 86 Bronco II Can't Engage 4WD
|
Sign In
|
|
I'm sure their test isn't very reliable like everything else from that place. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Aug 26, 2012, 4:53 PM
Post #5 of 9
(2184 views)
|
Re: 86 Bronco II Can't Engage 4WD
|
Sign In
|
|
LOL, so true. Not directed at you HT, but that is a crappy diagram. It doesn't even give you a clue as to which wire is what from the control module to the shift motor. Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 26, 2012, 5:03 PM
Post #6 of 9
(2179 views)
|
Re: 86 Bronco II Can't Engage 4WD
|
Sign In
|
|
Yep, I guess we can thank ford for that. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Aug 26, 2012, 5:07 PM
Post #7 of 9
(2175 views)
|
Re: 86 Bronco II Can't Engage 4WD
|
Sign In
|
|
If I had to work on the stuff at the dealer during those years, I would be pulling my hair out. They must of though their techs were psychic. or psycho... Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 26, 2012, 5:19 PM
Post #8 of 9
(2171 views)
|
Re: 86 Bronco II Can't Engage 4WD
|
Sign In
|
|
I also have access to the Ford site and they don't even go back that far. That one was Alldata. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Aug 26, 2012, 5:29 PM
Post #9 of 9
(2166 views)
|
Re: 86 Bronco II Can't Engage 4WD
|
Sign In
|
|
Look at the 89 Bronco II transfer case control diagram. Much better. Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|