Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









86 f150 no power in cab


Search for (search options)
 



swilly1986
New User

Oct 10, 2011, 9:18 PM

Post #1 of 9 (3954 views)
  post locked   86 f150 no power in cab  

i have a 1986 ford f150 milage is unknown. truck would start and run intil i replaced the transmission, now that the transmission is back when i turn the key nothing happens. i replaced the starter and the solinoid truck will turn over good if i jump the solinoid but my windows will not roll up and nothing in the cab will work battery is brand new. i have no clue what to do please help


Blulakr
User

Oct 10, 2011, 10:49 PM

Post #2 of 9 (3945 views)
  post locked   Re: 86 f150 no power in cab  

Check all fuses both underhood and inside. Make sure all ground cables are attatched to both the engine and the body.


swilly1986
New User

Oct 15, 2011, 5:46 AM

Post #3 of 9 (3906 views)
  post locked   Re: 86 f150 no power in cab  

i checked all fuses and replaced the fuseable links under the hood but still will not crank with the key and no power to my windows or lights


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Oct 15, 2011, 10:39 AM

Post #4 of 9 (3898 views)
  post locked   Re: 86 f150 no power in cab  

Auto trans or manual?



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



swilly1986
New User

Oct 15, 2011, 1:48 PM

Post #5 of 9 (3891 views)
  post locked   Re: 86 f150 no power in cab  

auto trans with a 351 windsor


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Oct 15, 2011, 2:23 PM

Post #6 of 9 (3887 views)
  post locked   Re: 86 f150 no power in cab  

The neutral safety switch can prevent the starter from engaging but that would have nothing to do with not having power in the cab. That can only be a burnt fusible link, bad connection somewhere or bag ignition switch.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



swilly1986
New User

Oct 16, 2011, 6:24 PM

Post #7 of 9 (3872 views)
  post locked   Re: 86 f150 no power in cab  

well i got the truck running and it was the neutreal safety switch i unplugged it and i put a jumper in the two red wires and it fired right up. Runs a little rough but i have a ways to go before i sling her in the mudhole. thanks for all the help!


1986stepsidef150
New User

Feb 17, 2012, 9:01 PM

Post #8 of 9 (3709 views)
  post locked   Re: 86 f150 no power in cab  

did you have any power at all? I think I am having the same problem. I did some tranny work and now the truck wont do anything. no lights no radio no horn anything. The only thing I can do is crank it with the solenoid but it wont start. I replaced everything just like you did. Please if you had the same problem let me know. Thank you Bill


nickwarner
Veteran / Moderator
nickwarner profile image

Feb 17, 2012, 11:05 PM

Post #9 of 9 (3703 views)
  post locked   Re: 86 f150 no power in cab  

don't piggyback another post. Start a separate one.

Swilly put a jumper cable from a shiny part of the motor to the ground terminal of the battery, making sure all connections are clean. If it runs at all differently then you know the grounds are an issue


(This post was edited by nickwarner on Feb 17, 2012, 11:08 PM)






 
 
 






Search for (options) Privacy Sitemap