|
|
gixxer6nick
User
Jun 8, 2005, 10:08 AM
Post #1 of 7
(2190 views)
|
|
87 S-10 wiring issue
|
Sign In
|
|
Need some help please!
I'm installing a new cd receiver in my 87' s-10 that was never equipped with a radio from the factory. My biggest problem is trying to find a switched power for the receiver. I already have the constant power and the ground, and already ran the wire for speakers in the dash and behind the seat. Already installed the antenna also but have not the slightest clue on which of the many wires are switched power in the dash. I haven't tested them yet but thought that maybe someone already knows.
Thanks,
Nick
PS: Anyone have a wiring diagram for my truck? For the dash!
(This post was edited by gixxer6nick on Jun 8, 2005, 10:31 AM)
|
|
| |
|
|
DanD
Veteran
/ Moderator
Jun 8, 2005, 12:40 PM
Post #2 of 7
(2188 views)
|
|
Re: 87 S-10 wiring issue
|
Sign In
|
|
There should be auxiliary terminals in the fuse panel that should be key powered. Get yourself a test light, turn the keys to the run position and probe the empty terminals. When you find one that lights the test light, turn the keys off and see if the light goes out.
You don’t need a wiring diagram to figure this out. Have fun.
Dan.
Canadian "EH"
|
|
| |
|
|
gixxer6nick
User
Jun 8, 2005, 12:56 PM
Post #3 of 7
(2187 views)
|
|
Re: 87 S-10 wiring issue
|
Sign In
|
|
Hey Dan! You da man! Tell you the truth I never thought of that. Thanks for the quick help!
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Jun 8, 2005, 4:49 PM
Post #4 of 7
(2184 views)
|
|
Re: 87 S-10 wiring issue
|
Sign In
|
|
You may also need constant power to one wire if the unit you bought has a clock, and may lose preset stations and you can find that the same way Dan mentioned. Good luck,
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Jun 10, 2005, 12:01 PM
Post #6 of 7
(2167 views)
|
|
Re: 87 S-10 wiring issue
|
Sign In
|
|
Just make sure it's fused and unless it's some monster powered new radio you should be all set,
|
|
| |
|
|
gixxer6nick
User
Jun 16, 2005, 7:53 AM
Post #7 of 7
(2158 views)
|
|
Re: 87 S-10 wiring issue
|
Sign In
|
|
It's all good now! I ended up with more problems than when I started this project. This was the first and last time I will ever attempt to put a stereo in a vehicle that is not equipped to do so. First off I had to jerry-rig a mount for the radio surround to mount to the dash. I ended up using my soildering iron to plastic weld the damn thing to the dash. It worked great though. Next, I took the speaker grills out of the dash, and attached to the grills was a piece of thin plastic so that dust would not fall into the inside of the dash. This means that there were absolutely no way of mounting any speakers in the dash so I used plywood for that. And a standard truck box with 2 eights in the back. Sounds great!!!! Thanks for the wiring help guys!!
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
