|
|
|
93 K 1500 ignition timing
|
|
|
| |
|
|
ByGeorge
Novice
May 18, 2010, 5:43 AM
Post #1 of 6
(4687 views)
|
|
93 K 1500 ignition timing
|
Sign In
|
|
Trying to find the correct ignition timing (degrees BTDC) on my 1993 Chevy K1500 - 350 - V8 - 5.7 L .
All the info I have tells me "HOW" to set the timing, manual states to check "Emissions control info under the hood" and that doesn't say anything either. I have read post that vary from 0 degrees to 20 degrees. So is setting the timing kinda like a recipe where you "Season to your taste?"
Thanks for your help.
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
May 18, 2010, 6:18 AM
Post #2 of 6
(4680 views)
|
|
Re: 93 K 1500 ignition timing
|
Sign In
|
|
If that decal is still there and legible it probably says this engine you don't set the timing. Not sure what year they fixed it such that the computer decided all of it once distributor was in place properly.
The days of fiddling with timing ended long before 1993,
T
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 18, 2010, 6:42 AM
Post #3 of 6
(4674 views)
|
|
Re: 93 K 1500 ignition timing
|
Sign In
|
|
It's not a "season to your taste" at all. The reason you can't find a spec is because there are so many different emissions packages that they all require different timing specs. That's why they tell you to read the label. It's the only place that it's specific to your vehicle.
It appears that your engine combination does have a spec though.
Here it is
Base Timing, with Manual and Automatic Transmissions: 0°(TDC)
Note: The Timing Connector breaks out of the engine wiring harness conduit adjacent to the distributer. It is a single wire sealed connector that has a tan with black stripe lead.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
(This post was edited by Hammer Time on May 18, 2010, 6:42 AM)
|
|
| |
|
|
ByGeorge
Novice
May 18, 2010, 8:46 AM
Post #4 of 6
(4666 views)
|
|
Re: 93 K 1500 ignition timing
|
Sign In
|
|
Thank you for the info, I'll give it a shot tonight
|
|
| |
|
|
ByGeorge
Novice
May 18, 2010, 6:50 PM
Post #5 of 6
(4658 views)
|
|
Re: 93 K 1500 ignition timing
|
Sign In
|
|
I unplugged the timing connector.....set the timing to 0 degrees.....tightened distributor & plugged the timing connector back in.....checked timing again & it was advanced by 20 degrees...does this sound about right?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 18, 2010, 6:53 PM
Post #6 of 6
(4655 views)
|
|
Re: 93 K 1500 ignition timing
|
Sign In
|
|
If you plugged the timing connector back in that would be normal. the computer takes over. If it happened without plugging it back in, you may have a bad timing chain.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
