Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Alternator problem Renault Panel Van.


Search for (search options)
 



BML
New User

Jan 22, 2014, 6:57 AM

Post #1 of 8 (1510 views)
Alternator problem Renault Panel Van. Sign In

The red light came on in my son's Panel Van and after taking the sump guard of he found that there was a wire loosely held in by what he described as Wax. He cleaned it up and stuffed it back in again and the red light went out. He got to work four miles away and the red light came on again.
I have never come across an alternator with a wire held in by wax so I would welcome some advice because if I buy a used or even new alternator I can only assume that the wire will have to be connected to the alternator by wax?
Many thanks.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jan 22, 2014, 7:46 AM

Post #2 of 8 (1498 views)
Re: Alternator problem Renault Panel Van. Sign In

We don't have Renault's here in the US so I couldn't tell you what it is.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



BML
New User

Jan 22, 2014, 7:49 AM

Post #3 of 8 (1493 views)
Re: Alternator problem Renault Panel Van. Sign In

With respect. Is this a serious reply?


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Jan 22, 2014, 8:16 AM

Post #4 of 8 (1489 views)
Re: Alternator problem Renault Panel Van. Sign In

Yes from me. Site is mostly N. American. I have no clue what the thing is or for. Not the point though as it seems it need it and wiring to be properly repaired permanently and suggest doing that if you have to take things out of the way to fix the break.


Best I can suggest. If it sets off a warning it must be needed?


Tom



BML
New User

Jan 22, 2014, 9:13 AM

Post #5 of 8 (1482 views)
Re: Alternator problem Renault Panel Van. Sign In

North American, I should have known. I was attached to an American Unit in Korea and they caused me nothing but trouble. The problem is that I'm close to eighty now so when I think about cars they are of the 1960 period and I know that things have changed so much now.


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Jan 22, 2014, 9:41 AM

Post #6 of 8 (1479 views)
Re: Alternator problem Renault Panel Van. Sign In

Things were different then too. US and Canada specs are mostly the same. For MANY decades specs have been tough to sell a new car to either country from safety features, crash tolerance, lighting, emissions and more. Many car makers chose not to make the changes and quit selling to N. America but continued elsewhere.


The trouble is the tech info is either very hard to find or costs a lot of money so who would buy it here for another place?


Anyone can search and come upon this site and notice only that we use English only but so do lots of other places so you wouldn't know.


A lot of things are basic designs then the specifics for an exact model of something can be tough for the regulars here, that's all,


Tom



nickwarner
Veteran / Moderator
nickwarner profile image

Jan 24, 2014, 8:10 AM

Post #7 of 8 (1453 views)
Re: Alternator problem Renault Panel Van. Sign In


In Reply To
North American, I should have known. I was attached to an American Unit in Korea and they caused me nothing but trouble.

So this is really going to be an anti-American issue simply because your car isn't sold here so none of us have any sort of tech data on one? Pretty sad . By the way, this "wax" you talk of is likely epoxy. Many components that do not unplug have their wires attaced inside them and then the cavity is filled with epoxy to prevent moisture from getting in and corroding. The wires leading out eventually go to some sort of connector. By pushing the wire back in it is making some sort of connection for now but will not last. The part the wires are going into may possibly be threaded into a larger part, and just the small piece containing the wires would be all that is needed to make the repair. Some sensors are like that, with a length of wire coming out of them a short way and then having a connector. That is called a "pigtail" here in the US. Look up the part online through parts stores, I would imagine you can find a picture of it. Look on the pic and see if those wires are included. Or swing into the parts store and have them come look at it to find out exactly what part it is.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jan 24, 2014, 8:13 AM

Post #8 of 8 (1452 views)
Re: Alternator problem Renault Panel Van. Sign In

This fool is from UK of all places to be throwing stones.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.







 
 
 






Search for (options) Privacy Sitemap