|
|
350S10PETE
New User
Sep 15, 2009, 9:30 AM
Post #1 of 5
(3007 views)
|
Diode Help Needed
|
Sign In
|
|
Hello, I have a S10 with a homemade 350 so manuals don't work for me. I am having trouble with aftermarket fan controllers, they don't last, so I am going to attempt to control the fans that cool my engine with homemade circuitry. I have attached a document that hopefully will provide all of the information necessary for you to advise me as to the kind/size of the diodes that I will need. If you feel that I am out in "left field" with my idea your advice will be appreciated. Thank You, Pete
|
Attachments:
|
Two Fan Operation Requirements.doc
(29.5 KB)
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 15, 2009, 10:20 AM
Post #2 of 5
(3000 views)
|
Re: Diode Help Needed
|
Sign In
|
|
Diodes are simply one way valves for electricity. Rather than go to manual switches, why don't you just ad a rely to the controller your using. If powering the fan is overloading the controller, then use the controller to trigger a relay that is carrying currunt from another source. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
350S10PETE
New User
Sep 15, 2009, 2:59 PM
Post #3 of 5
(2990 views)
|
Re: Diode Help Needed
|
Sign In
|
|
I know what a diode is and what it does, that is not what my question was. I also stated that fan controllers did not last and were expensive. Did you look at the attachment that went with this post? Pete
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Sep 15, 2009, 3:01 PM
Post #4 of 5
(2990 views)
|
Re: Diode Help Needed
|
Sign In
|
|
Yes I did but I would never wire a fan to a manual switch. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Sidom
Veteran
/ Moderator
Sep 15, 2009, 8:28 PM
Post #5 of 5
(2985 views)
|
Re: Diode Help Needed
|
Sign In
|
|
HT has the best idea. Those fans draw a lot of amps no matter how you wire it up, if there isn't a relay for the fans then you will have problems down the road. A schematic of the way you have it wired right now would be helpful............
|
|
| |
|