|
|
Mikero01
New User
Dec 5, 2013, 8:58 PM
Post #1 of 6
(1891 views)
|
I have a 2010 ford explorer XLT. Every now and again when starting first thing in the morning especially when cold and sometimes while driving the door open light, emergency brake light and tire pressure sensor faulty message illuminate at the same time. Also the turn lights work but dont show on the dash and also the dash lights dont work. This happens about 2 or 3 times a week. Help please with idea's.
|
|
| |
|
|
DanD
Veteran
/ Moderator
Dec 6, 2013, 5:35 AM
Post #2 of 6
(1869 views)
|
|
Re: Electrical fault
|
Sign In
|
|
I don't have any repair information on a 2010 Escort; they haven't been sold here in Canada for a number of years.
By just reading the symptoms, I'm thinking the instrument cluster itself is the issue. Some of the soldered joints may have cracked and when it is cold these connections are going open. Why I say this, is that there are to many different circuits affected for it to be a signal input to the cluster. Plus if it were a power or ground issue the whole cluster would be turning on and off.
I would pull the cluster and take it to an automotive electronics repair shop.
Dan.
Canadian "EH"
(This post was edited by DanD on Dec 6, 2013, 5:39 AM)
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Dec 6, 2013, 9:16 AM
Post #3 of 6
(1859 views)
|
|
Re: Electrical fault
|
Sign In
|
|
Dan - may be my eyesight also! Explorer/Escort. Either way the cluster is the likely issue as Dan said,
T
|
|
| |
|
|
DanD
Veteran
/ Moderator
Dec 6, 2013, 9:45 AM
Post #4 of 6
(1851 views)
|
|
Re: Electrical fault
|
Sign In
|
|
How I read Escort in that is beyond me??????
Canadian "EH"
|
|
| |
|
|
Mikero01
New User
Dec 8, 2013, 2:13 PM
Post #5 of 6
(1782 views)
|
|
Re: Electrical fault
|
Sign In
|
|
Thanks for your advise, the only other info is that I dont hear the signal turn light when the in use even though it is working when the dash problem is present.
Does anyone have a procedure for removing the instrument cluster
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Dec 8, 2013, 2:40 PM
Post #6 of 6
(1780 views)
|
|
Re: Electrical fault
|
Sign In
|
|
What are you going to do when you remove it?
This dash cluster is a module in itself. You need a professional scan tool to do some diagnostics before you start taking anything apart and if it is determined to be the cluster, you will need to locate a replacement and have it programmed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
