Main IndexAuto Repair Home Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN




Automotive Repair
Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:   
  Login
  Sign up here!



Latest Forum Post
with_replies.gif image   1989 toyota pickup 3.0 crank no start
I have a 1989 toyota pickup 3.0 crank no...

with_replies.gif image   Strut spring orientation and strut mount tension nut
2017 Nissan rogue awd 2.5 L Put in Monro...

with_replies.gif image   Transmission stuck in part, I have tried everything
So I'm working on my elderly fathers 201...

with_replies.gif image   2017 dodge journey LED headlights on/off randomly
Year of vehicle 2017 Make of vehicle dod...

with_replies.gif image   Kia Soul starter replacement issues!
Okay so my car is a 2010 Kia soul 2.0 en...

hot_with_replies.gif image   Please Help - Knock sound & engine fail
Hi all, Hoping to get some insight and ...

with_replies.gif image   multiple warning lights
2013 GMC Terrain 130,000 miles 4 cylinde...

with_replies.gif image   03 alero no low speed blower
Good day everyone, I have a 2003 Olds a...

with_replies.gif image   04 Chevy 2500hd tail light issues
Help!!! I have changed my combo switch...

with_replies.gif image   1999 Grand Caravan Sport not starting.
Hi. I'm new here. I hope someone can hel...




Fix mangled wiring harness

Search for (search options)
 



Bumzag
New User

Jun 29, 2018, 5:36 PM

Post #1 of 4 (1767 views)
Fix mangled wiring harness Sign In
https://imgur.com/fjQ8PCr

Any advice on fixing this? My drive belt rubbed through the wiring harness, the pink goes to the MAF I'm pretty sure because the car is bucking really bad and it threw like P0122 I think it's a low voltage to the MAF.

I was just gonna cut out the sections, resolder it in and then shrink wrap it.


(This post was edited by Bumzag on Jun 29, 2018, 5:37 PM)


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jun 29, 2018, 5:51 PM

Post #2 of 4 (1759 views)
Re: Fix mangled wiring harness Sign In
You're going to have to open that up fully to inspect each wire and repair them properly. If any of the wires are broken or damaged internally, you will have to cut them and solder them back together with heat shrink over them individually. If you have to remove any lengths, you will have to splice an extensions in to match the length of the other wires.

Tape the whole thing up when you are finished.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



(This post was edited by Hammer Time on Jun 29, 2018, 5:51 PM)


Bumzag
New User

Jun 29, 2018, 8:31 PM

Post #3 of 4 (1742 views)
Re: Fix mangled wiring harness Sign In
Sounds good, that was the plan. There's one 3 wires that are damaged and exposed. Any advice on the gauge of wire to use? Obviously I'll use a larger gauge but.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jun 30, 2018, 3:43 AM

Post #4 of 4 (1732 views)
Re: Fix mangled wiring harness Sign In
Just use the same gauge wire that is already there.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.






 
 
 






Search for (options) Privacy Sitemap