|
|
|
Help! Blinkers don't work
|
|
|
| |
|
|
Abradler
New User
Sep 15, 2016, 5:01 PM
Post #1 of 2
(1474 views)
|
|
Help! Blinkers don't work
|
Sign In
|
|
I own a 1995 mercury sable. Both the signal lights and the hazard lights don't work whatsoever. Not clicking no lights no nothing. I have read that the multi function switch is a frequent thing to go on these cars so I pulled it out. I called lordco and they told me it's a $150 part and if it's not the problem I can't return it, and we are worried it could just be a flasher relay, but I can't find a damn flasher relay anywhere. All the fuses are brand new so I know it's not that. Can anyone shed some light before I go drop $150
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Sep 15, 2016, 5:32 PM
Post #2 of 2
(1468 views)
|
|
Re: Help! Blinkers don't work
|
Sign In
|
|
If you make voltage checks with a meter or 12 volt test light, you can pretty much find out what it will need. Did you check the fuses to make sure they are good and have power on them? Is there any aftermarket equipment wired up to the signal circuits? It has an electronic flasher which is located some where under the left side of the dash near the emergency brake . It has three wires going to it. (light blue, red/white, black)
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Sep 15, 2016, 5:38 PM)
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 