|
|
|
Ignition Problem with 02 Impala
|
|
|
| |
|
|
Clark87
New User
Dec 31, 2013, 12:36 AM
Post #1 of 5
(1614 views)
|
|
Ignition Problem with 02 Impala
|
Sign In
|
|
Recently I have been having a problem with my 02 Chevy Impala, and I suspect the ignition cylinder is to blame. When I try to turn the key in the ignition, it won't budge an inch. The engine won't turn on or even the battery. For the past year I've had problems with getting the key to turn over, but I've always managed to get it do so after trying a few times, that is until now. I've tried getting another key made from the VIN number, as well as lubricating the key itself with oil, and jiggling the steering wheel back and forth, but nothing has worked. It seems like the ignition cylinder is a problem part for these cars, and I'm hoping I won't have to spend several hundred dollars to get it fixed. Any help or insight into this issue would be greatly appreciated.
(This post was edited by Clark87 on Dec 31, 2013, 12:41 AM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Dec 31, 2013, 3:48 AM
Post #2 of 5
(1584 views)
|
|
Re: Ignition Problem with 02 Impala
|
Sign In
|
|
First off, you should never put oil in a lock cylinder. It only causes more problems. Locks are lubricated using powdered graphite. Too late for yours now. It sounds like you already realize that the lock needs to be replaced so I'm not sure what you're asking for.
They will also have to do a relearn for the security system after replacing the lock.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Clark87
New User
Dec 31, 2013, 8:07 PM
Post #3 of 5
(1558 views)
|
|
Re: Ignition Problem with 02 Impala
|
Sign In
|
|
I was simply looking for any thoughts or opinions as to something else it could be or things I could try from those who know more than I about these things, just like everyone else who posts on here.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jan 1, 2014, 8:31 AM
Post #4 of 5
(1542 views)
|
|
Re: Ignition Problem with 02 Impala
|
Sign In
|
|
Better replace the lock cylinder while you still have a chance of turning it. Once it jams up it is a PITA to get it separated from the ignition switch. You can also have a lock smith code the new cylinder, so you don't need two different keys.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Jan 1, 2014, 8:34 AM)
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
