TEMP GAGE - Automotive Wiring and Electrical


	Auto Repair Home	SEARCH POSTS	WHO'S ONLINE	LOG IN

Automotive Repair

Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:
  Login
  Sign up here!

Latest Forum Post

Lukewarm Heat............

New antifreeze reverse flush heater core...

multiple warning lights

2013 GMC Terrain 130,000 miles 4 cylinde...

2014 Nissan Sentra Shaking

Car recently started shaking when accele...

Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086

N/A

1989 toyota pickup 3.0 crank no start

I have a 1989 toyota pickup 3.0 crank no...

Strut spring orientation and strut mount tension nut

2017 Nissan rogue awd 2.5 L Put in Monro...

Transmission stuck in part, I have tried everything

So I'm working on my elderly fathers 201...

2017 dodge journey LED headlights on/off randomly

Year of vehicle 2017 Make of vehicle dod...

Kia Soul starter replacement issues!

Okay so my car is a 2010 Kia soul 2.0 en...

Please Help - Knock sound & engine fail

Hi all, Hoping to get some insight and ...

TEMP GAGE

Sign up here!

Search for (search options)

Auto Repair Home>> Automotive Repair>> Automotive Wiring and Electrical

trans am crazy
Novice

Apr 21, 2006, 7:40 PM

Post #1 of 3 (1785 views)

TEMP GAGE	Sign In

i have an 89 firebird i just bought it.. the temp gage was working and no its not i replaced the coolent temp sencer.. is that the right one to get the gage to work?
well i put the new one in and the gage still dont work

Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Apr 22, 2006, 7:51 AM

Post #2 of 3 (1775 views)

Re: TEMP GAGE	Sign In

Are you sure you replaced the sender for the gauge? If so the next most likely problem is in the dash which can be a total PIA.

Trick: If you have an odometer reset that is close and goes thru the plastic glass see if you can SO carefully get a piece of mechanic's wire thru and just touch the needle of the gauge. It may just have stuck. I'm a cheap cactus and drive older cars and sometimes this crazyness works!! T

DanD
Veteran / Moderator
DanD profile image

Apr 24, 2006, 4:29 AM

Post #3 of 3 (1769 views)

Re: TEMP GAGE	Sign In

Back in 89 they still used two sensors, actually one is a sensor for the PCM and the other is a sending unit for the gauge.
In the diagram I’ve marked the coolant sensor with a blue dot and the temperature-sending unit with a read dot.
The sending unit may have one or two wires depending on whether you have a check gauges light along with the gauge. Regardless of how many wires the one you want to deal with is the dark green wire.
To test the sender, unplug the green wire and ground it to the engine block or battery negative with a jumper wire.
Then turn the ignition to the run position the gauge should go to the full hot position, if it does replace the sending unit.
If not you will need to check for an open in the green wire from the sending unit to the instrument cluster unit (gauge).
If the green wire is ok and there is power to the dash unit replace the dash unit.
I’m not sure when they started making the instrument clusters an integrated unit, so I’m not sure if this will apply to yours. Meaning that if something goes wrong with any one gauge or portion of the cluster the whole cluster will need to be replaced or rebuilt.
You could call the dealer and ask the parts department if the individual gauges are sold, have your VIN number when you call them.
Let us know what you find.
Dan.

Canadian "EH"

Search for (options) Privacy Sitemap