|
|
neileo
User
May 3, 2015, 2:03 PM
Post #1 of 7
(1714 views)
|
i hope this is under the right category, but i have a 02 f150 XL and the cruise control doesnt work, the buttons on the steering wheel do light up it just wen i hit the buttons nothing happens at all, i have no dash light on or anything, i was thinking it might be a fuse, i just dont know what number it is or where that would be, the fuse box in the cab doesnt have a diagram on the cover, if its something that might be expensive to replace then its not a big deal, any help would be appreciated
|
|
| |
|
|
neileo
User
May 3, 2015, 2:54 PM
Post #2 of 7
(1699 views)
|
|
Re: cruise control
|
Sign In
|
|
if you need more details just ask
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 3, 2015, 3:36 PM
Post #3 of 7
(1691 views)
|
|
Re: cruise control
|
Sign In
|
|
There is no magic answer. You're just going to have to track the problem down using a wiring diagram and you really should have a professional scan tool also.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
May 3, 2015, 3:40 PM
Post #4 of 7
(1688 views)
|
|
Re: cruise control
|
Sign In
|
|
Do a visual inspection of the components for the cruise control system under the hood. Has the cruise deactivation pressure switch recall been done on this? Pull the connector off the pressure switch and make sure it isn't leaking brake fluid. The switch is on the master cylinder.
If the recall hasn't been done, unplug the switch and leave it that way until you can get it to the dealer to have the recall performed. If you have the VIN, you can check to see if the recall has been performed or not.
https://vinrcl.safercar.gov/vin/
In the pic below the recall has been done on this vehicle. You can see the blue tagged modified wiring harness.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on May 3, 2015, 3:42 PM)
|
|
| |
|
|
neileo
User
May 4, 2015, 11:45 AM
Post #5 of 7
(1669 views)
|
|
Re: cruise control
|
Sign In
|
|
my truck does have that blue tag meaning it did get the recall part, i pulled the plug and there was a little bit of brake fluid inside it but i have yet to notice the brake fluid going down in the master cylinder so i dont believe there is a leak
|
|
| |
|
|
nickwarner
Veteran
/ Moderator
May 4, 2015, 12:53 PM
Post #6 of 7
(1666 views)
|
|
Re: cruise control
|
Sign In
|
|
If you have brake fluid inside the electrical plug, you do have a leak. The inside of the plug should be dry.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
May 4, 2015, 4:29 PM
Post #7 of 7
(1658 views)
|
|
Re: cruise control
|
Sign In
|
|
Nicks right. There shouldn't be any fluid in the sensor connector socket. If there is brake fluid inside the sensor socket, replace the sensor. You don't even have to bleed the brakes when you change it out. If the switch is registering your applying the brake when your really not, the cruise won't activate.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on May 4, 2015, 4:30 PM)
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
