Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









electrical help


Search for (search options)
 



draggndime9
New User

Feb 18, 2008, 6:17 PM

Post #1 of 4 (1449 views)
electrical help Sign In

i have a 92 toyota camry that i recentally replaced the igniter on. then it wouldnt start so i checked the rotor and it had a crack all the way up. i replaced that. went to start it up and it wont do anything. it has a brand new(fully charged) battery. getting no power to the fuse block inside of the car. but getting power to the fuse block and junction box in the engine bay. thanks for your time and any help would be greatly appreciated


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Feb 19, 2008, 8:20 AM

Post #2 of 4 (1443 views)
Re: electrical help Sign In


I'd just take one of those (DC Circuit tester) and see where the voltage stops from the battery,
T



Double J
Veteran / Moderator
Double J profile image

Feb 19, 2008, 3:31 PM

Post #3 of 4 (1438 views)
Re: electrical help Sign In

I have little to offer....except I remember one time I had a Toyota that "wouldn't do anything"...I remember finding some fried wiring behind the drivers side kick panel towards the firewall...

When you say it won't do anything,does it turn over or not?..if not any lights on on the dash with key on?...

Just a thought


draggndime9
New User

Feb 21, 2008, 9:45 AM

Post #4 of 4 (1432 views)
Re: electrical help Sign In

i used one of those lights. i had power at the distrubutor, alt, fan, the fuse box(under the hood), and a few other connections.

when the key is on nothing at all happens.






 
 
 






Search for (options) Privacy Sitemap