|
|
daw
New User
May 16, 2012, 8:42 AM
Post #1 of 10
(2267 views)
|
power window not working
|
|
|
1998 ford windstar 198.000 6 cylinders 3.0 .... In 4/2011 I had the power window motor on passengers side replaced. A couple of months ago it quit again but after a few days it worked again. This happend a few times. This time it has not started working. Even the drivers side switch will not work it. I took the door panel off. There is no power going to the motor when I push the switch. Now I'll admit I try my best but not an expert at this. Also I do not have the $180 they charged before. I thank you for any help.
|
|
| |
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
May 16, 2012, 8:53 AM
Post #2 of 10
(2254 views)
|
Re: power window not working
|
|
|
Check that master switch is alternating the wires from power to ground for up and down action. If not found may be wires in the door jam giving out with just the bending of opening and closing door(s) and at the miles guessing it gets opened and closed a lot but have found that with lower mile vehicles several times is the problem and not the motor itself, T
|
|
| |
|
daw
New User
May 16, 2012, 8:57 AM
Post #3 of 10
(2247 views)
|
Re: power window not working
|
|
|
thanks. i can't get to it right now but will let you know what i find out. thanks again
|
|
| |
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
May 16, 2012, 9:18 AM
Post #4 of 10
(2234 views)
|
Re: power window not working
|
|
|
It's fairly easy to check. If you find dead one it's hard to pull back the snorkel of wires but can check continuity by color of wire to inside wire. They can break inside insulation partly at first then totally and insulation may be intact. If you find this absolutely use fine stranded new wire if your way to repair meant to bend as not all wires need to bend of course so it's different wire. Master switch an override other windows such that if a passenger is choosing up and you if driver choose down at the same time master wins T
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 16, 2012, 9:46 AM
Post #5 of 10
(2225 views)
|
Re: power window not working
|
|
|
I can answer your question with 2 words...................... "Chinese Parts" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
May 16, 2012, 9:50 AM
Post #6 of 10
(2220 views)
|
Re: power window not working
|
|
|
If so - Yup! T
|
|
| |
|
meri343le
New User
May 30, 2012, 1:49 PM
Post #7 of 10
(2091 views)
|
Re: power window not working
|
|
|
You are so right! I use couple of times shop name deleted Inc but I am very satisfied, Tony check every little detail and the parts are never Chinese!
(This post was edited by Hammer Time on May 30, 2012, 1:51 PM)
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
May 30, 2012, 1:53 PM
Post #8 of 10
(2085 views)
|
Re: power window not working
|
|
|
Promote your shop somewhere else and if you think for one minute those aren't chinese parts, I have some swamp land for you too. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
nickwarner
Veteran
/ Moderator
Jun 6, 2012, 4:55 PM
Post #10 of 10
(2007 views)
|
Re: power window not working
|
|
|
You really don't know when to quit man. Do you want everyone in the world that has a phone to call yours 24/7?
|
|
| |
|