Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN






06 Lincoln Mark LT


Search for (search options)
 



southensoldier
User

Jan 5, 2010, 6:33 PM

Post #1 of 2 (4027 views)
post icon 06 Lincoln Mark LT Sign In

im getting a code of P2104 for my truck... there is also a charging system light, the ECM and trans malfunction lights comes on....truck will drive but then sputters with a popping like sound....and lose power and shut down but starts right back up.... is this one thing tiesd to all these problems or all different problems...the truck by the way have under 70k miles on it...any help would be greatly appreciated


DanD
Veteran / Moderator
DanD profile image

Jan 6, 2010, 5:09 AM

Post #2 of 2 (4019 views)
Re: 06 Lincoln Mark LT Sign In

This 2104 code is what is called an informational code that usually sets when there are other codes. Also when this code sets it puts the Throttle Actuator Control (TAC) system in what is called Failure Mode Effects Management (FMEM) of mode forced idle. In other words the Powertrain Control Module (PCM or computer) has put the systems in limp in mode; this is to give you enough power to get off the road and hopefully not cause any damage to the powertrain (engine & transmission) or the emission systems. So yes whatever is causing this code to set; could be causing all of the issues or one of the issues is causing all the others, including the code.
As to what; it’s any ones guess until you get involved in what could be a very long & drawn out test procedure.
This could be anything from having to have the PCM reprogrammed, to a sensor that has absolutely nothing to do with the TAC system.
No silver bullet fix on this one; take it in to where someone has the proper test equipment & knowledge to perform the diagnostics.

Dan.

Canadian "EH"










 
 
 






Search for (options) Privacy Sitemap