|
|
1997 Nissan Quest GXE knocksensor?
|
|
|
| |
|
Guest
Anonymous Poster
not2night@nc.rr.com
Aug 23, 2008, 3:23 PM
Post #1 of 2
(8838 views)
|
1997 Nissan Quest GXE knocksensor?
|
Sign In
|
|
check engine light was on, so had my codes cleared, check engine light is off but service station says the equipment is still showing p0325. It was showing both the p0325 and po400 but he cleared it i drove 300 miles around town on the highway to see if light would stay off.it stayed off, took it to him to see if he could do inspection says it is still showing the p0325. will resting the car over night correct anything.? Is there anything I can do or am I going to have to pay big bucks to correct this. Inspection is due by the 30th of Aug I have 7 days.
|
|
| |
|
Double J
Veteran
/ Moderator
Aug 26, 2008, 10:55 AM
Post #2 of 2
(8769 views)
|
Re: 1997 Nissan Quest GXE knocksensor?
|
Sign In
|
|
Just a thought...found this bulletin...Long shot... FYI......Knock sensor code alone will not illuminate the MIL (Check Engine Light) EGR - Code 32 or DTC P0400, Cracked BPT Hose REFERENCE: NTB98-052 CLASSIFICATION: EC98-011 DATE: June 15, 1998 TITLE: 1993-98 QUEST EGR MALFUNCTION DUE TO CRACKED BPT VALVE BOTTOM HOSE APPLIED VEHICLE: 1993-98 Quest (V40) SERVICE INFORMATION If a Quest vehicle has an EGR malfunction code (i.e.: code 32 for 1993-95 MY or code P0400 for 1996-98 MY), the black rubber hose at the bottom of the BPT valve may be cracked. In addition to the above codes, symptoms may include: - MIL `on' - Spark knock - Exhaust ticking noise. NOTE: The 1993 Quest FED model will not have a MIL `on' symptom for this incident. SERVICE PROCEDURE Figure 1 1. Inspect the black rubber hose at the bottom of the BPT valve (see Figure 1). A. If the hose is cracked, replace with the hose from the Parts Information table. CAUTION: Due to exhaust gas temperatures, do not use a substitute for the correct hose. B. If the hose is not cracked, look for other causes for the EGR malfunction.
|
|
| |
| | |
|