|
|
JolyOne
Novice
Oct 6, 2011, 3:17 PM
Post #1 of 9
(5346 views)
|
2009 Infinity M35
|
Sign In
|
|
I have a 2009 Ininity M35. The "VDC off" and "Slip" lights keep coming on and sometimes the Brake light is on at the same time. What does this mean? Also, the wood veneer on the drover's side door is coming off and cracked in a couple of spots. Anyone have that problem after just 2 years?
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Oct 6, 2011, 4:05 PM
Post #2 of 9
(5339 views)
|
Re: 2009 Infinity M35
|
Sign In
|
|
Not sure about interior trim problem, but you will probably need to have someone scan the ABS control unit to see what codes it could be storing. VDC is the vehicle dynamics control system. VDC is basically stability control for under and over steering. Keeps the vehicle from spinning out when going around tight curves or when you jerk the wheel real hard to avoid something. Slip light means one of two things. If the VDC off light is off and the slip light is flashing that means your vehicle is sliding and the VDC system is active. If the VDC off light is on and the slip light is on, that means there is a malfunction in the system. The brake lamp is on telling you that you have fault in the brake system that might be related to the VDC being off. You should have the brake system inspected and the ABS control unit scanned for codes to see what is going on with that. Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Oct 6, 2011, 4:06 PM)
|
|
| |
|
JolyOne
Novice
Oct 6, 2011, 4:08 PM
Post #3 of 9
(5334 views)
|
Re: 2009 Infinity M35
|
Sign In
|
|
thanks. I guess I'll be at the dealer Saturday. If the work is not under warranty, then to a mechanic I go.
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Oct 6, 2011, 4:13 PM
Post #4 of 9
(5330 views)
|
Re: 2009 Infinity M35
|
Sign In
|
|
Let us know what you find out. Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
JolyOne
Novice
Oct 6, 2011, 4:16 PM
Post #5 of 9
(5325 views)
|
Re: 2009 Infinity M35
|
Sign In
|
|
Sure will. BTW - The slip light is not blinking.
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Oct 6, 2011, 4:19 PM
Post #6 of 9
(5320 views)
|
Re: 2009 Infinity M35
|
Sign In
|
|
Good that means your not doing 90 mph around a hair pin curve..LOL. Slip light only blinks if the VDC system is active and is detecting that your on the verge of spinning out. Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Oct 6, 2011, 4:26 PM)
|
|
| |
|
JolyOne
Novice
Oct 6, 2011, 4:22 PM
Post #7 of 9
(5313 views)
|
Re: 2009 Infinity M35
|
Sign In
|
|
LOL - That may have happened a little in the rain yesterday - but it recovered. No worries.
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Oct 6, 2011, 4:25 PM
Post #8 of 9
(5312 views)
|
Re: 2009 Infinity M35
|
Sign In
|
|
We get stability control problems on some of the other vehicles that roll into our shop. The fun part is testing the system after a repair. We have a large grassy field that we use to try and spin the car out. Its really interesting how the system works and is able to keep the vehicle from losing control. Probably a good idea to exercise the ABS and Stability control system every once in a while in a vacant grassy lot anyway. Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
JolyOne
Novice
Oct 6, 2011, 4:28 PM
Post #9 of 9
(5306 views)
|
Re: 2009 Infinity M35
|
Sign In
|
|
Fun - Sure beats my job!
|
|
| |
|