|
|
Code P0193 Fuel Rail Pressure Sensor Circuit High Bank 1
|
|
|
| ![](https://autoforums.carjunky.com/images/clear_shim.gif) |
|
![](https://autoforums.carjunky.com/images/clear_shim.gif)
DanVanClam
Novice
Feb 20, 2024, 1:49 PM
Post #1 of 17
(22260 views)
|
Code P0193 Fuel Rail Pressure Sensor Circuit High Bank 1
|
Sign In
|
|
2004 Ford E-350 Super Duty Ext Cargo Van w/ 6.8L V10 I have a CEL and the code it's throwing is P0193. Did some digging online and it looks like I'm going to need to replace the Fuel Rail Pressure Sensor, which is a pretty easy repair for DIY Called my local Ford dealer to get the OEM part#, (which is 3F2Z9G756AC) and they told me the part cost $184... then when I go on Ebay to buy the part myself, it's only like $19... (here's a link to the part I'm going to buy on Ebay https://www.ebay.com/itm/155996898183) My question is... what gives? Is the Ford dealership really that big of a ripoff? Or is this part on Ebay a fake or ripoff even though it says its OEM/Made in Germany, seems legit, etc I want to do the repair myself for as reasonable a price as possible, but I don't want to accidentally get suckered into buying some cheep Chinese knockoff that could cause more problems for my vehicle down the line Any advice would be much appreciated!!! Thanks
(This post was edited by DanVanClam on Feb 23, 2024, 2:41 PM)
|
|
| ![](https://autoforums.carjunky.com/images/clear_shim.gif) |
|
![](https://autoforums.carjunky.com/images/clear_shim.gif)
Hammer Time
Ultimate Carjunky
/ Moderator
![Hammer Time profile image](https://autoforums.carjunky.com/images/users/11277-user_icon.jpg)
Feb 20, 2024, 3:46 PM
Post #2 of 17
(22243 views)
|
Re: Huge Part Price difference between Dealer and Ebay?
|
Sign In
|
|
Something isn't making any sense here. First, that looks like a MAP sensor, not a fuel rail sensor. I searched your part number and that same part comes up but if I go to a Ford parts site and put in the year, make, model and engine size, not part comes up. Have you located and compared the part. I looked in the factory service manual and can't come up with a part number or even a picture of it. I'm doubting if this truck even has one. They are only used on variable, returnless fuel systems and this truck doesn't seem to have that system. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
(This post was edited by Hammer Time on Feb 20, 2024, 3:52 PM)
|
|
| ![](https://autoforums.carjunky.com/images/clear_shim.gif) |
|
![](https://autoforums.carjunky.com/images/clear_shim.gif)
DanVanClam
Novice
Feb 21, 2024, 2:48 PM
Post #3 of 17
(22200 views)
|
Re: Huge Part Price difference between Dealer and Ebay?
|
Sign In
|
|
First of all, thank you for your help! You are a cool guy. Anyway, I did some digging and I agree, things are not adding up. I called my ford dealer again to make sure I got the right part number, and they basically are drawing the same conclusion as you, this vehicle shouldn't have a Fuel Rail Pressure Sensor I might have a better lead though. I'd already brought the vehicle into a repair shop a few weeks back to diagnose the problem, and they sent me a video of them jiggling the wire that connects to this sensor. The voltages spiked, and went all over the place when they did this, thus throwing the code (P0193 Fuel Rail Pressure Sensor Circuit High Bank 1) Using that video, I was able to locate the part myself. It's actually very easily accessible and basically right in front of you when you take the doghouse off. Snapped a few pics of the sensor and attached them I also called this repair shop and asked them for the part they would have replaced it with if I'd have had them do the repair. They said it was a Echlin 2260004 Looked that up and was able to find this aftermarket part from Napa https://www.napaonline.com/en/p/CRB2260004 It's a $90 part, which is more in line with what I was thinking it would be Soooo, maybe this is the right part? I have no idea. I'm new to the whole DIY scene, so any sagely advice is much appreciated Thank you again
(This post was edited by Hammer Time on Feb 21, 2024, 3:02 PM)
|
|
| ![](https://autoforums.carjunky.com/images/clear_shim.gif) |
|
![](https://autoforums.carjunky.com/images/clear_shim.gif)
Hammer Time
Ultimate Carjunky
/ Moderator
![Hammer Time profile image](https://autoforums.carjunky.com/images/users/11277-user_icon.jpg)
Feb 21, 2024, 3:02 PM
Post #4 of 17
(22188 views)
|
Re: Huge Part Price difference between Dealer and Ebay?
|
Sign In
|
|
I don't know. It still doesn't make sense. I had to delete your pictures as they were way too large and I couldn't even read the text. Use our software to reduce them more than 50% and repost them so I can see where that part goes.
I just looked through the entire wiring diagram for the engine management system and it doesn't show any fuel pressure sensor. I'll look at the pictures again when you repost them. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
(This post was edited by Hammer Time on Feb 21, 2024, 3:06 PM)
|
|
| ![](https://autoforums.carjunky.com/images/clear_shim.gif) |
|
![](https://autoforums.carjunky.com/images/clear_shim.gif)
DanVanClam
Novice
Feb 21, 2024, 4:54 PM
Post #5 of 17
(22174 views)
|
Re: Huge Part Price difference between Dealer and Ebay?
|
Sign In
|
|
Sorry about that, here's the two pics again at 50% I'll go take the doghouse off again tomorrow and take a more zoomed out pic and circle the sensor so you can tell where it is
|
|
| ![](https://autoforums.carjunky.com/images/clear_shim.gif) |
|
![](https://autoforums.carjunky.com/images/clear_shim.gif)
Hammer Time
Ultimate Carjunky
/ Moderator
![Hammer Time profile image](https://autoforums.carjunky.com/images/users/11277-user_icon.jpg)
Feb 21, 2024, 5:01 PM
Post #6 of 17
(22171 views)
|
Re: Huge Part Price difference between Dealer and Ebay?
|
Sign In
|
|
That does seem to be the part you are pricing. It doesn't even appear to be attached to the fuel rail. Something you said earlier about wiggling the wire triggering the code could mean this is more of a wiring problem than a sensor problem. I might try to get a replacement pigtail to replace that connector first or at least include it with a sensor if you decide to go that route right away. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| ![](https://autoforums.carjunky.com/images/clear_shim.gif) |
|
![](https://autoforums.carjunky.com/images/clear_shim.gif)
DanVanClam
Novice
Feb 22, 2024, 10:19 AM
Post #7 of 17
(22140 views)
|
Re: Huge Part Price difference between Dealer and Ebay?
|
Sign In
|
|
I'll probably at least buy that part then and replace it. Before I do that though, I think I should ask a more big picture question... is this really a serious issue worth fixing? The van seems to be preforming normally. The only way I can tell something is wrong is because of the CEL and code. It's a pretty old vehicle at this point , and I have no intension of selling it, so resale value is not a concern. Am I crazy to think "If it ain't broke, don't fix it"? The repair shop I'm dealing with seems to be one that want's to sell me on everything they possibly can, so of course they say it's serious... but I would love a second opinion on this before devoting more time and energy to it PS - I also sent you a direct message with a link to my vehicle inspection in case that helps
(This post was edited by DanVanClam on Feb 22, 2024, 10:27 AM)
|
|
| ![](https://autoforums.carjunky.com/images/clear_shim.gif) |
|
![](https://autoforums.carjunky.com/images/clear_shim.gif)
Hammer Time
Ultimate Carjunky
/ Moderator
![Hammer Time profile image](https://autoforums.carjunky.com/images/users/11277-user_icon.jpg)
Feb 22, 2024, 12:41 PM
Post #8 of 17
(22130 views)
|
Re: Huge Part Price difference between Dealer and Ebay?
|
Sign In
|
|
I saw the video. As a rule we don't use private message as we want this to be public but in this case it was fine. I'm even more sure that this is a wiring problem at the plug now. The reason it seems to drive fine is because at the moment it is only glitching momentarily and the computer is picking up on that. It is an important sensor because the PCM uses the reading to regulate fuel mixture so it is very important. It just hasn't totally failed yet. He recommended the same thing I did, replace both the plug and the sensor. I would say the plug is the bigger priority in this situation. You can buy a pigtail at the dealer and even some aftermarket sources which consists of the plug and about a foot of wire to splice into the harness. They are not expensive. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| ![](https://autoforums.carjunky.com/images/clear_shim.gif) |
|
![](https://autoforums.carjunky.com/images/clear_shim.gif)
DanVanClam
Novice
Feb 23, 2024, 2:39 PM
Post #9 of 17
(22085 views)
|
Re: Huge Part Price difference between Dealer and Ebay?
|
Sign In
|
|
That's great news! I'll just start by replacing the plug/wire then I do have experience with basic soldering, so I might be able to do it myself, but since it is an important job, I'm thinking I'd better leave it to the professionals. I'll call around and get some estimates. Hopefully I can get a better price than the $550 (just for the plug/wire) quoted to me by the shop that did the inspection Maybe I could even take the new pigtail/wire into an electrician and have them do it for cheaper than an auto shop, since car repair prices seem to be so crazy right now In any case, I'll get the plug replaced and report back here in a few days to let yall know if that fixed it PS - I've also edited the subject line of this thread to more accurately describe the problem we ended up diagnosing here
(This post was edited by DanVanClam on Feb 23, 2024, 2:43 PM)
|
|
| ![](https://autoforums.carjunky.com/images/clear_shim.gif) |
|
![](https://autoforums.carjunky.com/images/clear_shim.gif)
Hammer Time
Ultimate Carjunky
/ Moderator
![Hammer Time profile image](https://autoforums.carjunky.com/images/users/11277-user_icon.jpg)
Feb 23, 2024, 2:44 PM
Post #10 of 17
(22080 views)
|
Re: Huge Part Price difference between Dealer and Ebay?
|
Sign In
|
|
It's not difficult to replace the plug. They will give you about a foot of wire, probably all the same color. You just have to match the wire colors with the position on the old plug. Twist the stripped wire together before soldering and use "heat shrink" over the top for insulation. Here's a video. It's a bit of overkill but all correct. https://www.youtube.com/watch?v=qxqZJH3SfN4 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
(This post was edited by Hammer Time on Feb 23, 2024, 2:53 PM)
|
|
| ![](https://autoforums.carjunky.com/images/clear_shim.gif) |
|
![](https://autoforums.carjunky.com/images/clear_shim.gif)
DanVanClam
Novice
Feb 29, 2024, 11:23 AM
Post #11 of 17
(21901 views)
|
Re: Huge Part Price difference between Dealer and Ebay?
|
Sign In
|
|
I called 3 different Ford dealers and none of them were able to find the part (the pigtail). The vehicle is 20 years old at this point, so it makes sense. And the problem of not being able to find the right pigtail is compounded by people not even knowing what I'm talking about... so basically it's the same problem you had with not thinking my vehicle should even have a fuel rail pressure sensor Because of this, I couldn't even get a part number for the pigtail, so it's looking pretty unlikely that I'll be able to find it OEM or even aftermarket I also got quotes for having a mechanic just repair the wire/pins, since that seems to be what most shops are saying they would do anyway if I just brought it in and had them do the work Lowest quote I got was $180 for the diagnostic, and then if the problem is what we think it is, they can roll that fee into the price of the repair, and basically just do it for the $180. That's a heck of a lot better than the $550 the other place quoted me, and I can actually afford that so I'm alright with that, and at this point I'm thinking I'll probably just have to go with that route
|
|
| ![](https://autoforums.carjunky.com/images/clear_shim.gif) |
|
![](https://autoforums.carjunky.com/images/clear_shim.gif)
Hammer Time
Ultimate Carjunky
/ Moderator
![Hammer Time profile image](https://autoforums.carjunky.com/images/users/11277-user_icon.jpg)
Feb 29, 2024, 11:26 AM
Post #12 of 17
(21898 views)
|
Re: Huge Part Price difference between Dealer and Ebay?
|
Sign In
|
|
Another option would be to go to a scrap yard and get a used one to splice in. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| ![](https://autoforums.carjunky.com/images/clear_shim.gif) |
|
![](https://autoforums.carjunky.com/images/clear_shim.gif)
DanVanClam
Novice
Mar 14, 2024, 10:06 AM
Post #13 of 17
(21447 views)
|
Re: Huge Part Price difference between Dealer and Ebay?
|
Sign In
|
|
Alright, I've made some progress. Turns out the pigtail is fine, and it's a bad sensor. I took it to the shop and they were able to do some testing and bypass the sensor, and that fixed it. I figure if it's just the sensor, I can save some money and replace it myself. So now, today, I finally got around to pulling the part off, and comparing it to the new one. I can verify that it's for sure a bad sensor because with the part in had, if I shake it, I can hear something rattling around inside. I tried to get the OEM part, not an aftermarket one, but I did get it on eBay for $20. My concern now is that the replacement part I bought might not be legit. There's no writing on it, and it doesn't say GERMANY on it. I've attached some comparison photos. With the part in hand, I was able to find an exact match for the old part as all the writing matches, it's this one... https://www.rockauto.com/en/moreinfo.php?pk=4495119&cc=0&pt=6376 But that part I just linked above also gives an alternate inventory number (3F2Z9G756AC) which matches the new one I have... which is this part... https://www.rockauto.com/en/moreinfo.php?pk=13983457&cc=1427611&pt=6376&jsn=1048 So am I being overly paranoid in thinking it might be a knock off? I have everything taken apart right now, so it's tempting to just plug it in and see if it works, but I thought I'd take a moment and hopefully get a second opinion before doing that. The new part appears to be identical to the old one aside from it having no writing on it.
(This post was edited by DanVanClam on Mar 14, 2024, 10:09 AM)
|
|
| ![](https://autoforums.carjunky.com/images/clear_shim.gif) |
|
![](https://autoforums.carjunky.com/images/clear_shim.gif)
Hammer Time
Ultimate Carjunky
/ Moderator
![Hammer Time profile image](https://autoforums.carjunky.com/images/users/11277-user_icon.jpg)
Mar 14, 2024, 10:13 AM
Post #14 of 17
(21442 views)
|
Re: Huge Part Price difference between Dealer and Ebay?
|
Sign In
|
|
Same part, different manufacturer. The original was made by Bosch and the new one was made elsewhere, probably China. That's where most of the parts are made now anyway. It's not going to be the quality of a Bosch but should still work. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| ![](https://autoforums.carjunky.com/images/clear_shim.gif) |
|
![](https://autoforums.carjunky.com/images/clear_shim.gif)
DanVanClam
Novice
Mar 14, 2024, 1:17 PM
Post #15 of 17
(21323 views)
|
Re: Huge Part Price difference between Dealer and Ebay?
|
Sign In
|
|
Ok cool. I installed the new sensor and took it for a short test drive around the block. So far so good! I'll try to remember to report back here in about 3 months or so to confirm that the issue did not come back, or the new (cheap Chinese) sensor didn't fail and cause me more headaches. All in all, the testing at the shop cost $180, and the sensor was $20, so $200 total for the job. The original quote I got was $900, so I'm very happy to have done this myself and saved $700 which I really really need right now! Thank you SO much Hammer Time for all your expertise and advise. Could not have done it without you.
|
|
| ![](https://autoforums.carjunky.com/images/clear_shim.gif) |
|
![](https://autoforums.carjunky.com/images/clear_shim.gif)
Hammer Time
Ultimate Carjunky
/ Moderator
![Hammer Time profile image](https://autoforums.carjunky.com/images/users/11277-user_icon.jpg)
Mar 14, 2024, 1:20 PM
Post #16 of 17
(21320 views)
|
Re: Huge Part Price difference between Dealer and Ebay?
|
Sign In
|
|
You're welcome ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| ![](https://autoforums.carjunky.com/images/clear_shim.gif) |
|
![](https://autoforums.carjunky.com/images/clear_shim.gif)
DanVanClam
Novice
May 14, 2024, 8:53 AM
Post #17 of 17
(12765 views)
|
Re: Huge Part Price difference between Dealer and Ebay?
|
Sign In
|
|
So, that cheep Fuel Rail Pressure sensor that was supposedly a "Genuine Ford Motorcraft part", but had no writing on it, ended up failing, and causing a whole bunch of headaches. Had to get it towed to a mechanic because it wouldn't start. They replaced the sensor with a Bosche one, and replaced all my spark plugs because they were all ruined. Apparently the vehicle smoked black for 5 minutes when they finally got it started because there was fuel built up where it shouldn't have been. Also, the whole fiasco somehow killed my alternator, so the total bill this time was around $1,500, most of that being for their labor time which was quite a few hours. Not to mention multiple weeks of the vehicle being in and out of the shop... Anyway, the vehicle is fine now, and at least I found a different mechanic that seems more trustworthy then the other guys I was dealing with. Next time something goes wrong, I'll just be able to take it to them and not have to worry so much about spending big money with people who won't even tell me the price of parts/labor individually
|
|
| ![](https://autoforums.carjunky.com/images/clear_shim.gif) |
| | ![](https://autoforums.carjunky.com/images/clear_shim.gif) |
|