Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









P0172 & P0175 2005 econoline


Search for (search options)
 



danito
User

Sep 9, 2009, 12:21 PM

Post #1 of 11 (4369 views)
post icon P0172 & P0175 2005 econoline Sign In

Crazy This is a 05 ford and I am having problems with banks 1&2 being to rich now this truck has no fuel return line plus fuel pressure regulator I belive is read by PCM but it works by vaccum line.No other codes it stalls taking off well of course it its too rich,any ideas...........


Loren Champlain Sr
Veteran / Moderator
Loren Champlain Sr profile image

Sep 9, 2009, 12:29 PM

Post #2 of 11 (4365 views)
Re: P0172 & P0175 2005 econoline Sign In

danito; Which model Econoline? What engine? The codes are only telling you that it is rich, both banks. Could be several scenarios. MAP sensor, pressure regulator, vacuum leak, leaky injector(s) ect., ect., ect.
Loren
SW Washington


danito
User

Sep 9, 2009, 12:41 PM

Post #3 of 11 (4362 views)
Re: P0172 & P0175 2005 econoline Sign In

All spark plugs looked the same kind of gray towards black its a 250 econoline and I belive its a 5.4 liter. I do not think its a vaccum leak it idles very smooth,and it has MAF.


Loren Champlain Sr
Veteran / Moderator
Loren Champlain Sr profile image

Sep 9, 2009, 12:54 PM

Post #4 of 11 (4358 views)
Re: P0172 & P0175 2005 econoline Sign In

danito; The first things I'd check would be the air filter, fuel pressure, and clean the MAF.
Loren
SW Washington

(This post was edited by Loren Champlain Sr on Sep 9, 2009, 12:55 PM)


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Sep 9, 2009, 1:05 PM

Post #5 of 11 (4349 views)
Re: P0172 & P0175 2005 econoline Sign In

I'd also check for fuel inside the vacuum line for the fuel pressure regulator. That's pretty common on that truck.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



danito
User

Sep 9, 2009, 1:31 PM

Post #6 of 11 (4343 views)
Re: P0172 & P0175 2005 econoline Sign In

I did clean the MAF and it did had a new air filter I also cleaned the trottle body just in case it was getting stock this truck its a TPS motor trottle boby.I have not checked fuel pressure.


Sidom
Veteran / Moderator
Sidom profile image

Sep 9, 2009, 4:00 PM

Post #7 of 11 (4338 views)
Re: P0172 & P0175 2005 econoline Sign In

In addition to the other good advise you've been getting.

There is a TSB 07-8-3 out for a P0172, P0175 and/or downhill surge & harsh transmission engagement.....

Check the basics and then check the calibration code of the pcm to make sure it has the latest flash.............


danito
User

Sep 9, 2009, 11:12 PM

Post #8 of 11 (4333 views)
Re: P0172 & P0175 2005 econoline Sign In

Is a TSB something like a factory recall.It does acts like if torque converter would actually take a moment to charge.But like I said before all spark plugs looks the same.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Sep 10, 2009, 2:59 AM

Post #9 of 11 (4329 views)
Re: P0172 & P0175 2005 econoline Sign In

A TSB (technical service bulletin) is merely an advisory from the factory to it's dealers and technicians to make them aware of facts the manufacturer is aware of concerning any given situation or problem. Nothing to do with a recall. It's just a type of memo.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



danito
User

Sep 10, 2009, 4:15 AM

Post #10 of 11 (4325 views)
post icon Re: P0172 & P0175 2005 econoline Sign In

WinkThanks for the info I will check for the TSB to see if anything comes up on it. You guys are alot of help I thank you.


danito
User

Sep 10, 2009, 5:39 AM

Post #11 of 11 (4320 views)
post icon Re: P0172 & P0175 2005 econoline Sign In

Look at this o2 readings sensor1 bank1 0.800 to 0.100 on & off sensor1 bank2 0.655 steady s2 b1 0.800 to 0.100 on & off s2 b2 0.655 steady weird readings what you guys think.






 
 
 






Search for (options) Privacy Sitemap