|
|
dr.donut
User
Aug 15, 2018, 4:52 AM
Post #1 of 11
(2540 views)
|
monitors 02 lesabre
|
|
|
My scanner lists monitors and I'd like to have them " cleared " for the inspection before I bring it in , Some are O.K. , one is N/A , and about 4 are inc. and I imagine those are a problem ? I'm allowed 1 in NY and last I heard from the mech. is I had 2 , now I see 4 , what are these "monitors" ?
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Aug 15, 2018, 5:17 AM
Post #2 of 11
(2535 views)
|
|
Re: monitors 02 lesabre
|
|
|
You mean complete right? You don't want to clear the monitors because they will have to run over again to complete.
N/A means that monitor isn't supported by that vehicle. Disregard that one. Which ones are incomplete?
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
dr.donut
User
Aug 15, 2018, 7:37 AM
Post #3 of 11
(2522 views)
|
|
Re: monitors 02 lesabre
|
|
|
I'll get that list later on , The mech. said you don't want to clear them also . I just want it ready for inspection so I don't waste the guys time .Thanks .
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 15, 2018, 10:00 AM
Post #4 of 11
(2519 views)
|
|
Re: monitors 02 lesabre
|
|
|
As DS stated, clearing them only starts the process all over so there is no benefit to clearing anything unless you just repaired something.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
dr.donut
User
Aug 15, 2018, 1:53 PM
Post #5 of 11
(2510 views)
|
|
Re: monitors 02 lesabre
|
|
|
I read the monitors , evap system mon inc , oxygen sensor heater inc , catalyst mon inc , there was a new evap pressure sensor put on this morning and the car went about 45 miles round trip highway miles , no other trouble codes were there
|
|
| |
|
|
dr.donut
User
Aug 20, 2018, 11:09 AM
Post #7 of 11
(2439 views)
|
|
Re: monitors 02 lesabre
|
|
|
The evap mon came up O.K. as did the others except for one remaining catalyst mon. I got the inspection and I'll see if the new coolant temp. sensor helps to drop the inc. on that , thanks
|
|
| |
|
|
dr.donut
User
Aug 24, 2018, 4:21 AM
Post #8 of 11
(2420 views)
|
|
Re: monitors 02 lesabre
|
|
|
The catalyst mon. is still inc. anything I can do to get it O.K.'d ?
|
|
| |
|
|
Sidom
Veteran
/ Moderator
Aug 27, 2018, 11:43 AM
Post #9 of 11
(2391 views)
|
|
Re: monitors 02 lesabre
|
|
|
I'll have to look up the exact criteria but usually if you take it out on the freeway and hold it steady around 60 for 5 to 10 minutes the cat monitor will run....if you hit the brk or turn sharp it all starts over...
|
|
| |
|
|
dr.donut
User
Aug 29, 2018, 4:06 AM
Post #10 of 11
(2367 views)
|
|
Re: monitors 02 lesabre
|
|
|
It finally O.K."d , A friend had a whole string of "inc.'s" , I don't want that , thanks , case closed
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 30, 2018, 10:50 AM
Post #11 of 11
(2345 views)
|
|
Re: monitors 02 lesabre
|
|
|
OK, thread closed
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
