|
| | |
|
|
mburn356
New User
Aug 26, 2013, 8:58 PM
Post #1 of 8
(3791 views)
|
|
04 Aveo Power Loss
|
Sign In
|
|
About 2 weeks ago I changed the timing belt after the idler went flying off. I was extremely happy when i learned that none of my valves were bent. The car started up great but has a rough idle. preformed a pressure test on all 4 cylinders and discovered that 2-4 messured at 180 psi, and 1 at 150. thats not the biig problem. right after doing this pressure test, my car has a large amount of power loss until i got to a higher speed. i drove it around the block a few times and discovered something i just cant understand. when i lightly tap on the pedal, all my power is there, and shifts great. however. if i push the pedal any more than that light feather tap, all power loss.
i thought APP sensor, but this car does not have one. i thought about the throttle position sensor, but i tested it and appears to be working ok. Codes came up as transmission and random misfire (both very helpful). something happened and just dont know what it is.
added note...i also checked my tans fluid and all is good, not burnt, no black specks.
its an '04 chevy aveo base, 1.6L with around 100,000 miles. ANY ideas would be amazing!!!
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 27, 2013, 2:42 AM
Post #2 of 8
(3768 views)
|
|
Re: 04 Aveo Power Loss
|
Sign In
|
|
How are you so sure that the valves aren't damaged?
This is an interference engine.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
mburn356
New User
Aug 27, 2013, 4:49 AM
Post #3 of 8
(3757 views)
|
|
Re: 04 Aveo Power Loss
|
Sign In
|
|
From what people have told me, if the car runs then most likely the valves aren't damaged. I'm not throwing out the idea for the valves on cyl. 1 being bent a bit, but I would think the others are fine. The car ran great (except idle) until the power loss.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 27, 2013, 4:51 AM
Post #4 of 8
(3753 views)
|
|
Re: 04 Aveo Power Loss
|
Sign In
|
|
You can't assume that. You have an unexplained driveability issue. You need to perform a leakdown test.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
mburn356
New User
Aug 27, 2013, 4:58 AM
Post #5 of 8
(3749 views)
|
|
Re: 04 Aveo Power Loss
|
Sign In
|
|
Ok. Ill do that when I get off work. But could that be causing the power loss like?
|
|
| |
|
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Aug 27, 2013, 5:25 AM
Post #6 of 8
(3744 views)
|
|
Re: 04 Aveo Power Loss
|
Sign In
|
|
Quote ">>From what people have told me, if the car runs then most likely the valves aren't damaged<<"
Stop listening to them.
Let HT take you on as I think this engine has lots more going on so let some accurate testing be your first move,
T
|
|
| |
|
|
mburn356
New User
Aug 27, 2013, 5:33 AM
Post #7 of 8
(3740 views)
|
|
Re: 04 Aveo Power Loss
|
Sign In
|
|
Ok. Is there any other tests I should do while I have the time today?
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 27, 2013, 5:41 AM
Post #8 of 8
(3738 views)
|
|
Re: 04 Aveo Power Loss
|
Sign In
|
|
I've already advised on on what you should be doing next.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
