Main IndexAuto Repair Home Search Posts SEARCH
POSTS 		Who's Online WHO'S
ONLINE 		Log in LOG
IN




Automotive Repair
Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:   
  Login
  Sign up here!



Latest Forum Post
with_replies.gif image   Lukewarm Heat............
New antifreeze reverse flush heater core...

with_replies.gif image   multiple warning lights
2013 GMC Terrain 130,000 miles 4 cylinde...

with_replies.gif image   2014 Nissan Sentra Shaking
Car recently started shaking when accele...

no_replies.gif image   Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
N/A

hot_with_replies.gif image   1989 toyota pickup 3.0 crank no start
I have a 1989 toyota pickup 3.0 crank no...

with_replies.gif image   Strut spring orientation and strut mount tension nut
2017 Nissan rogue awd 2.5 L Put in Monro...

with_replies.gif image   Transmission stuck in part, I have tried everything
So I'm working on my elderly fathers 201...

with_replies.gif image   2017 dodge journey LED headlights on/off randomly
Year of vehicle 2017 Make of vehicle dod...

with_replies.gif image   Kia Soul starter replacement issues!
Okay so my car is a 2010 Kia soul 2.0 en...

hot_with_replies.gif image   Please Help - Knock sound & engine fail
Hi all, Hoping to get some insight and ...




04 hyundai Sante fe codes

Search for (search options)
 



roth59
Novice

Jan 19, 2010, 5:58 PM

Post #1 of 5 (3721 views)
04 hyundai Sante fe codes Sign In
2004 Hyundai Sante Fe codes 302 304 306 Misfiring on 2,4,6,. Coils good, wires good, compression 140/150psi. injectors firing.Cat convertors have been checked. Bank 2 long term fuel trim -19 short term -7/8. O2 sensors not responding as fast as they should. Also bank 2 does not go into closed loop. Any ideas?


steve01832
Veteran
steve01832 profile image

Jan 20, 2010, 2:44 AM

Post #2 of 5 (3715 views)
Re: 04 hyundai Sante fe codes Sign In
Need to know which engine is in this. It is either a 2.4, 2.7, or a 3.5l.

Steve


roth59
Novice

Jan 20, 2010, 4:27 AM

Post #3 of 5 (3713 views)
Re: 04 hyundai Sante fe codes Sign In
It is a3.5liter


steve01832
Veteran
steve01832 profile image

Jan 20, 2010, 4:56 PM

Post #4 of 5 (3707 views)
Re: 04 hyundai Sante fe codes Sign In
From the description you have provided, it sounds like you may have a lean misfire problem. What you can try is to use propane enrichment. You said the O2 sensors aren't switching normally. With then engine warmed up, and I assume you are using a scan tool with data stream since you can say it's staying in open loop, watch the O2 voltages as you slowly open the propane bottle into the air cleaner. If the O2 sensor stays at 0 volts but the engine rpm smoothes out, replace O2 sensor. If the sensor responds by going high, and starts switching quickly above and below 1/2 volt, check for vacuum leaks. Also, check the MAF sensor performance.
***Using propane around old ignition wires can cause a flash fire hazard, always check the wires for any signs of burn marks or arcing along the insulation and boots prior to using propane enrichment!!!*** If any signs of voltage leakage are present, replace ignition wires before propane testing. This is one of the more dangerous tests that we do, but, is very effective.

Steve


roth59
Novice

Jan 20, 2010, 5:27 PM

Post #5 of 5 (3701 views)
Re: 04 hyundai Sante fe codes Sign In
Thanks Steve. That is the direction I have been leaning to, replacing the o2 sensors. I'll let you know if it works out. I'll check them out with propane first.





 
 
 






Search for (options) Privacy Sitemap