1978 JEEP 6 CYL. - Engine Troubleshooting


	Auto Repair Home	SEARCH POSTS	WHO'S ONLINE	LOG IN

Automotive Repair

Car Troubleshooting Topics
  Car Troubleshooting
  Engine Troubleshooting
  Engine Fault Codes
  Electrical and Wiring
  Transmission Problems

Car Repair Topics
  Car Making Noises
  Car Stereo Repair
  Heating or AC Issues
  Motorcycles and ATVs
  Tricks of the Trade
  Truck Repair Advice

Site Options:
  Login
  Sign up here!

Latest Forum Post

1989 toyota pickup 3.0 crank no start

I have a 1989 toyota pickup 3.0 crank no...

Strut spring orientation and strut mount tension nut

2017 Nissan rogue awd 2.5 L Put in Monro...

Transmission stuck in part, I have tried everything

So I'm working on my elderly fathers 201...

2017 dodge journey LED headlights on/off randomly

Year of vehicle 2017 Make of vehicle dod...

Kia Soul starter replacement issues!

Okay so my car is a 2010 Kia soul 2.0 en...

Please Help - Knock sound & engine fail

Hi all, Hoping to get some insight and ...

multiple warning lights

2013 GMC Terrain 130,000 miles 4 cylinde...

03 alero no low speed blower

Good day everyone, I have a 2003 Olds a...

04 Chevy 2500hd tail light issues

Help!!! I have changed my combo switch...

1999 Grand Caravan Sport not starting.

Hi. I'm new here. I hope someone can hel...

1978 JEEP 6 CYL.

Sign up here!

Search for (search options)

Auto Repair Home>> Automotive Repair>> Engine Troubleshooting

TED JEEP
New User

Apr 27, 2008, 4:53 PM

Post #1 of 3 (1621 views)

1978 JEEP 6 CYL.	Sign In

I HAVE 1978 JEEP WITH A INLINE 6CYL IT RUNS BUT IT STALS WITHOUT WARNING IT RUNS AT AN IDLE BUT IT WILL BE RUNNING GOOD THEN STALL OR RUN ERATINC LIKE IDLING DOWN THEN MISSING TIMMING SEEMS RIGHT PLUGS LOOK FOULED ALSO IT WILL RUN GOOD FOR A WHILE THEN JST STALL SOMTIMES IT IS ERRATIC SO I DID A COMPRESSION CK I FIRST WARMED THE MOTOR UP THEN I TOOK ALL THE PLUGS OUT STARTING FROM THE FRONT OF THE JEEP WORKING MY WAY BACK TOWARDS THE DRIVER THE FIRST READING WAS 170 THEN 175 THEN 190 THEN 177 THEN 182 THEN 170 THIS IS NOT THE FIRING ORDER BUT FROM THE FRONT OF THE JEEP BACK I DID THIS WITH THE THROTTLE ALL THE WAY DOWN CK IT TWICE AND GOT THE SAME READING COULD THER BE CARBON BUILDUP OR IS IT A CARB PROBLEM I TRY ADJUSTING THE CARB ENDLESLY AND TIMMING TO NO AVAIL ALSO I KEEP ON THE LOOKOUT FOR A VACUME LEAK CANT FIND ONE WHAT WOULD CAUSE THE THIRD CYL TO BE AT 190 AND THE 5TH TO BE AT 182 ENGINE IS VERY UNRELIABLE PLEASE ANY INFO WOULD HELP THANKS TED AND IS THIS SPREAD BIG ENOUGH TO MAKE IT RUN BAD

dave284
Enthusiast

Apr 27, 2008, 5:11 PM

Post #2 of 3 (1615 views)

Re: 1978 JEEP 6 CYL.	Sign In

With a vehicle this old...you are expecting wear, long as the compression readings aren't more than 15% of each other it I would think the rings would be o.k. A vacuum reading would give some insight too. Fouled plugs indicate a over rich fuel mixture....so you could be looking at replacing/rebuilding carb. BTW did you use oil in your compression test?

Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Apr 28, 2008, 12:53 AM

Post #3 of 3 (1611 views)

Re: 1978 JEEP 6 CYL.	Sign In

These had tons of troubles with intake manifold to head sealing and carb problems common. Carbon build up could account for high compression which with high load will knock.

Spray all around carb base and intake manifold for vacuum leaks. Generally when running ok - a good hwy run will clear out carbon build up,

T

Search for (options) Privacy Sitemap