|
|
|
1991 Chevy Cavalier 2.2 Running Rough
|
|
|
| |
|
|
TerryG
New User
May 16, 2007, 11:42 PM
Post #1 of 4
(2599 views)
|
1991 Chevy Cavalier 2.2 Running Rough
|
Sign In
|
|
A few weeks ago my wifes cav started dieing at stop signs and having rough starts. My friend and I replaced the coil packs and it ran great for a week or so. The other day my wife came home for lunch and the car wouldn't start when she got in to go back to work.
After looking it over I noticed that the injector would quit shooting gas at roughly mid throttle. I replaced the fuel pump relay and it seems to start and run fine, but it's making a popping noise from the exhaust after I rev the engine and let off the gas.
Does anyone have any suggestions on what the problem could be. I'm not totally sure that the relay actually fixed the problem, since it's been so sporadic anyway, but I let it idle for a good 15-20 minutes before I started giving it gas and it didn't die like it did before I replaced the relay.
Thanks for your time.
Edit: I've also replaced the plugs and wires.
(This post was edited by TerryG on May 17, 2007, 12:30 AM)
|
|
| |
|
|
TerryG
New User
May 18, 2007, 1:09 PM
Post #2 of 4
(2514 views)
|
|
Re: 1991 Chevy Cavalier 2.2 Running Rough
|
Sign In
|
|
The car ran fine for a few days, but once again died on my wife while she was coming home for lunch. I'm going to check the timing tomorrow, and I had suggested to me that the crank position sensor (i think that's what he said) or the ignition module could be bad.
Does anyone here have any suggestions at all? I'm kind of desperate to get this fixed and can't really afford to put the car in a shop unless it's absolutely necessary.
Thanks
(This post was edited by TerryG on May 18, 2007, 1:23 PM)
|
|
| |
|
|
steve01832
Veteran
May 19, 2007, 1:23 AM
Post #3 of 4
(2498 views)
|
|
Re: 1991 Chevy Cavalier 2.2 Running Rough
|
Sign In
|
|
Unfortunately the only way to diagnose the problem is to check it out while the vehicle is not starting. You will need to check fuel pressure, spark at plugs, and injector pulse. When it dies and won't start: If it has fuel pressure and no spark, but the injector is firing, replace the ignition module. If the fuel pressure is ok and has both no spark and no injector pulse, suspect the crank sensor. If it has spark and injector pulse, but no fuel pressure, check the fuel pump, fuse, wiring, relay, or fuel pump signal from PCM.
Steve
|
|
| |
|
|
TerryG
New User
May 19, 2007, 1:31 AM
Post #4 of 4
(2497 views)
|
|
Re: 1991 Chevy Cavalier 2.2 Running Rough
|
Sign In
|
|
Steve,
Thank you for the suggestions. I'll try to get the car in non-running condition (never thought I'd type that) tomorrow after I get done replacing the half-shaft in my blazer and see what I can come up with.
Thanks again
Terry
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
