|
|
jamster88
Novice
Apr 27, 2013, 7:29 PM
Post #1 of 9
(1467 views)
|
|
1991 skylark misfiring
|
Sign In
|
|
my girlfriend recently purchased a 1991 buick skylark with the 2.3L quad 4. on occasion it would sputter for a second and then pick up again. this same thing would more frequently happen at idle. last night we lost the cylinder all together and the muffler was glowing red shortly after. so i changed the plugs and their respective coils. ( the quad 4 has the "idi" or integrated direct ignition) which took me a second to figure out but all went well. except of course for the fact that it didnt fix the problem. i did notice that the misfiring plug was coated in fresh gas so i assume its getting fuel. im going to do a fuel pressure test tomorrow but until then im not entirely sure what to attack next. any help would be greatly appreciated.
(This post was edited by jamster88 on Apr 27, 2013, 7:55 PM)
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Apr 27, 2013, 8:14 PM
Post #2 of 9
(1440 views)
|
|
Re: 1991 skylark misfiring
|
Sign In
|
|
Replace the white coil housing and the spark plug boots. Also make sure you used Delco plugs and no other brand.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
jamster88
Novice
Apr 27, 2013, 10:17 PM
Post #3 of 9
(1432 views)
|
|
Re: 1991 skylark misfiring
|
Sign In
|
|
well i replaced all the plugs and all 4 coils, not sure what you mean by coil housing. all four coils attach to steel nipples protruding from the intake manifold cover. though i have heard that on another forum... maybe im missing something  greatly appreciate the input regardless, i'll be sure to check into that. also wondered if maybe timing could be the problem. though that doesnt make much sense... why 1 cylinder, and why all of a sudden? i dunno, thanks again tho
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Apr 28, 2013, 5:29 AM
Post #4 of 9
(1417 views)
|
|
Re: 1991 skylark misfiring
|
Sign In
|
|
Forget the timing it's not adjustable.
You need to change the housing that the coils sit in. That will resolve your problem.
You need to change 7,9,10 and 11
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
jamster88
Novice
Apr 28, 2013, 12:04 PM
Post #5 of 9
(1403 views)
|
|
Re: 1991 skylark misfiring
|
Sign In
|
|
aaaahhhhhh. ok, i did everything except 7. thanks for the advice.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Apr 28, 2013, 12:18 PM
Post #6 of 9
(1397 views)
|
|
Re: 1991 skylark misfiring
|
Sign In
|
|
You pretty much wasted your money on the coils, it's usually the housing that causes the problems.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
jamster88
Novice
Apr 28, 2013, 2:21 PM
Post #7 of 9
(1388 views)
|
|
Re: 1991 skylark misfiring
|
Sign In
|
|
took everything apart and noticed a little charring on the housing. so i replaced one of the coils and it runs like a dream. just read your last post... i guess this time it wasnt the housing  thanks for the advice, i wasnt even sure where the coil packs were. and now i know what to look for. thanks again
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Apr 28, 2013, 2:29 PM
Post #8 of 9
(1384 views)
|
|
Re: 1991 skylark misfiring
|
Sign In
|
|
So, the new coil was bad?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
jamster88
Novice
Apr 28, 2013, 8:44 PM
Post #9 of 9
(1370 views)
|
|
Re: 1991 skylark misfiring
|
Sign In
|
|
no, i believe i got my terminology wrong in one of the previous posts. i replaced all 4 plugs and boots. but once you posted that diagram ( very helpful by the way) everything kinda clicked. i went out, tore it all apart and noticed a bad coil. i had no idea the coils were inside the white housing. thanks again for your time, you've been extremely helpful
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
Lukewarm Heat............
Buy Flualprazolam Powder Online Whatsapp: +1(424) 328-1086
1989 toyota pickup 3.0 crank no start
