Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









1992 Olds Cutlass Supreme


Search for (search options)
 



weldingrod44
Novice

Mar 14, 2012, 5:44 PM

Post #1 of 12 (3958 views)
1992 Olds Cutlass Supreme Sign In

I have a 1992 Olds Cutlass Supreme with a 3.1 v6 wont start. I have change the crank sensor,ign. modual wire harness to and from them.The darn thing still wont fire.Have checked injectors with noid light and test light no flashing but test light stays on when cranking


samg.
User
samg. profile image

Mar 14, 2012, 6:09 PM

Post #2 of 12 (3947 views)
Re: 1992 Olds Cutlass Supreme Sign In

Have you checked fuel pressure?


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Mar 14, 2012, 6:29 PM

Post #3 of 12 (3932 views)
Re: 1992 Olds Cutlass Supreme Sign In

If the test light stays on during cranking you have a short to ground on the trigger wire somewhere. Could be the wire itself or the PCM. This is assuming you tested this correctly using a noid light and disconnected from the injector.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



weldingrod44
Novice

Mar 18, 2012, 4:09 AM

Post #4 of 12 (3867 views)
Re: 1992 Olds Cutlass Supreme Sign In

Have checked the fuel presure,45 to 47 psi. used a test light on the fuel injector plug have power on both wires with the key on


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Mar 18, 2012, 5:23 AM

Post #5 of 12 (3863 views)
Re: 1992 Olds Cutlass Supreme Sign In

You don't have power to both wires. You are checking it with the injector still plugged into it.

If you keep using a test light instead of a noid light you will be replacing the computer if you haven't ruined it already.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



(This post was edited by Hammer Time on Mar 18, 2012, 5:24 AM)


weldingrod44
Novice

Mar 18, 2012, 4:41 PM

Post #6 of 12 (3841 views)
Re: 1992 Olds Cutlass Supreme Sign In

All the injectors tested 12.2 to 12.5 ohms


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Mar 18, 2012, 4:46 PM

Post #7 of 12 (3838 views)
Re: 1992 Olds Cutlass Supreme Sign In


Quote
All the injectors tested 12.2 to 12.5 ohms


What does that have to do with the signals they receive?



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



weldingrod44
Novice

Mar 19, 2012, 3:45 AM

Post #8 of 12 (3824 views)
Re: 1992 Olds Cutlass Supreme Sign In

Wanted to make sure all the injectors were good since ya have to take the air plemon apart to test injector wires and since there is no Signal it back to square one


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Mar 19, 2012, 3:48 AM

Post #9 of 12 (3819 views)
Re: 1992 Olds Cutlass Supreme Sign In

Do you have spark at the end of the plug wire?



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



weldingrod44
Novice

Mar 19, 2012, 5:31 PM

Post #10 of 12 (3802 views)
Re: 1992 Olds Cutlass Supreme Sign In

Put the top of the motor back together tonight,had the old ignition modual tested it was ok,replaced the crank sensor and the wire that goes from it to the ignition modual,tryed to start it again and once again no spark at the plug,node light didnt work but has power going to the injectors.Priced a rebuilt ECM and it would be cheaper to just scrap the car.LOL


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Mar 19, 2012, 5:35 PM

Post #11 of 12 (3801 views)
Re: 1992 Olds Cutlass Supreme Sign In

It would require more sophisticated testing but it sounds like there is an issue with the crank sensor circuit somewhere.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



Discretesignals
Ultimate Carjunky / Moderator
Discretesignals profile image

Mar 19, 2012, 5:43 PM

Post #12 of 12 (3795 views)
Re: 1992 Olds Cutlass Supreme Sign In


Quote
had the old ignition modual

If you fooling around with the ignition module, does that mean you have no spark either?





Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.






 
 
 






Search for (options) Privacy Sitemap