|
|
ldavis76
New User
Jun 1, 2015, 4:18 PM
Post #1 of 7
(1345 views)
|
hi guys i have a 93 vigor starter went out so i replaced it also did valve cover gasket and grommets plugs wires and knock sensor got everything put back together i have a dead miss so was thinking injectors i replaced them no change. i have spark in all cylinders when i pull the #3 plug wire off the plug the motor running does not change so rechecked spark still have spark in all cylinders please help im lost
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jun 1, 2015, 4:28 PM
Post #2 of 7
(1340 views)
|
Re: 1993 acura vigor
|
Sign In
|
|
Was it missing before you did all that work? Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
Hammer Time
Ultimate Carjunky
/ Moderator
Jun 2, 2015, 2:21 AM
Post #3 of 7
(1331 views)
|
Re: 1993 acura vigor
|
Sign In
|
|
Did you double check your firing order? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
ldavis76
New User
Jun 2, 2015, 4:36 PM
Post #4 of 7
(1317 views)
|
Re: 1993 acura vigor
|
Sign In
|
|
Nope ran smooth before the work and did the wires one at a time as i was taught lol
|
|
| |
|
Discretesignals
Ultimate Carjunky
/ Moderator
Jun 2, 2015, 4:40 PM
Post #5 of 7
(1315 views)
|
Re: 1993 acura vigor
|
Sign In
|
|
Have you attempted to swap the spark plug on number 3 with another cylinder's plug to see if the misfire moves? Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
ldavis76
New User
Jun 2, 2015, 9:59 PM
Post #6 of 7
(1308 views)
|
Re: 1993 acura vigor
|
Sign In
|
|
No didn't try that but all plugs and wires are new and getting spark
|
|
| |
|
Tom Greenleaf
Ultimate Carjunky
/ Moderator
Jun 3, 2015, 2:54 AM
Post #7 of 7
(1306 views)
|
Re: 1993 acura vigor
|
Sign In
|
|
! Plugs can be bad when new or from shipping and or your handling. Can get the spark but not jump a gap at all or properly. Swap tronics is a cost free way to test for that as DS mentioned. When type and sizes allow same with plug wires. Manhandling them ruins them new but moreso older ones, T
|
|
| |
|