Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









1997 Ford Ranger Idle Problems


Search for (search options)
 



Midwest Ed
New User

Jan 11, 2007, 11:59 PM

Post #1 of 8 (9149 views)
post icon 1997 Ford Ranger Idle Problems Sign In

Mileage 90,000. (Fuel Inj)

My Ranger runs fine if I start with a cold engine. Idling is not a problem until the engine is shut off after running for awhile. Then after I restart (while Engine is still warm) ... the truck will not idle. I have to rev up the RPM to keep from stalling at stoplights.

This problem will persist until I finally shut it off and let set until the engine is cold. Been looking over manuals and was wondering if it might be the "Idle Air Control Solenoid" or possibly the "Throttle Position Sensor"?

Any guidance would be appreciated!

- Midwest Ed -


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Jan 12, 2007, 2:47 AM

Post #2 of 8 (9141 views)
Re: 1997 Ford Ranger Idle Problems Sign In

Rule out vacuum leaks first. Then get a code read as it must have something stored. A TPS can cause problems for sure but I don't recall any being highly engine temp sensitive, T



steve01832
Veteran
steve01832 profile image

Jan 12, 2007, 4:44 AM

Post #3 of 8 (9140 views)
Re: 1997 Ford Ranger Idle Problems Sign In

Another thing to check is fuel pressure. If the pressure is too high, you will idle OK cold because your truck needs a richer mixture. When it warms up however, it will be overly rich causing the engine to choke out. Rule fuel pressure out before you get into the computer aspect.

Steve


Midwest Ed
New User

Jan 12, 2007, 12:11 PM

Post #4 of 8 (9136 views)
Re: 1997 Ford Ranger Idle Problems Sign In

This one has been a little tricky. The Check Engine light never comes on. Will a code still get stored in that scenario?

I had the Ford dealer look at it about six months ago when the problem started. Of course by the time they get around to looking at the truck, the engine is cool and it idles great. They we unable to locate any problems. This is a real pain. When sitting at a stoplight I have to drop it in neutral, keep one foot on the break and the other on the gas revving up to about 800.

I guess I'll start by looking over the vacuum system for any leaks.

Thanks for the feedback.

- Midwest Ed -


Midwest Ed
New User

Jan 12, 2007, 12:15 PM

Post #5 of 8 (9135 views)
Re: 1997 Ford Ranger Idle Problems Sign In

RE: Fuel Pressure Guage. Looks like they run about $50. Is there a way to test this without buying a guage?

Thanks.

- Midwest Ed -


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Jan 12, 2007, 1:08 PM

Post #6 of 8 (9133 views)
Re: 1997 Ford Ranger Idle Problems Sign In

Just know MidwestEd that the cost of tools to do this stuff would scare the hair off of most folks! It really is a reason that prices are high. Let's not even get into the cost of a place to do this, the taxes, hazmats, -- it goes on forever.

Almost every place around me that has sold out became coffee and donut shops, T



way2old
Veteran / Moderator
way2old profile image

Jan 12, 2007, 5:33 PM

Post #7 of 8 (9130 views)
Re: 1997 Ford Ranger Idle Problems Sign In


In Reply To
RE: Fuel Pressure Guage. Looks like they run about $50. Is there a way to test this without buying a guage?

Thanks.

- Midwest Ed -



Check with local parts house. I know Autozone has a loan a tool program. You put up a small deposit, use tool, return tool and get money back. Also look at the idle control system. Could be a problem where the heat is causing pintle to stick. Usually this shows when cold and clears when warm, but there is nothing about auto repair that is written in stone.



Being way2old is why I need help from younger minds


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Jan 12, 2007, 5:52 PM

Post #8 of 8 (9129 views)
Re: 1997 Ford Ranger Idle Problems Sign In

The tool rental program is a great thing for most folks. More and more places are doing it. For fuel pressure on a Ford you might be able to use a tire gauge but it would certainly ruin the gauge, T







 
 
 






Search for (options) Privacy Sitemap