|
|
Glade2
Novice
Aug 25, 2011, 10:40 AM
Post #1 of 6
(2680 views)
|
2000 Buick Air Pump
|
Sign In
|
|
I have a 2000 Buick Century The service eng.soon light came on.
I had it on a comp.and it said the Air pump was bad.Anybody know how hard the pump is to put on because i was thinking of doing it myself.Any help would be greatly appricated.
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 25, 2011, 11:54 AM
Post #2 of 6
(2660 views)
|
|
Re: 2000 Buick Air Pump
|
Sign In
|
|
No, it didn't tell you that the air pump was bad. That's not what codes do. It recorded a specific occurrence and you need to determine what caused it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Aug 25, 2011, 12:47 PM
Post #3 of 6
(2656 views)
|
|
Re: 2000 Buick Air Pump
|
Sign In
|
|
Another words, what was the trouble code number you got?
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
|
|
| |
|
|
Glade2
Novice
Aug 25, 2011, 2:53 PM
Post #4 of 6
(2639 views)
|
|
Re: 2000 Buick Air Pump
|
Sign In
|
|
I had a mechanic do it and he said it was the air pump thats all i know
|
|
| |
|
|
Hammer Time
Ultimate Carjunky
/ Moderator
Aug 25, 2011, 3:05 PM
Post #5 of 6
(2634 views)
|
|
Re: 2000 Buick Air Pump
|
Sign In
|
|
REMOVAL PROCEDURE
- Turn OFF the ignition.
- Loosen the AIR exhaust pipe hose pinch clamp.
- Disconnect the AIR exhaust hose from the AIR pump.
- Disconnect the AIR pump electrical connector.
- Remove the nuts securing AIR pump bracket to the frame.
- Remove the AIR pump and bracket as an assembly.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
- Secure the AIR pump and bracket to the Frame mount with the nuts.
Tighten
Tighten the nuts securing the AIR pump mounting bracket to 50 N.m (37 lb ft) .
- Connect the AIR pump electrical connector.
- Lightly lubricate inner edge of AIR exhaust hose.
- Attach the AIR exhaust hose to the AIR pump outlet port.
- Place the AIR exhaust hose pinch clamp around the AIR pump outlet port and exhaust hose connection.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.
|
|
| |
|
|
Discretesignals
Ultimate Carjunky
/ Moderator
Aug 25, 2011, 3:06 PM
Post #6 of 6
(2632 views)
|
|
Re: 2000 Buick Air Pump
|
Sign In
|
|
You might want to call your mechanic and ask him/her what the trouble code number was or if the check engine light is on, you can swing into Autozone and they can scan it for you.
Without the trouble code number we have no clue what is going on with your A.I.R system.
Or if you believe your mechanics prognosis, then there is the procedure above.
Since we volunteer our time and knowledge, we ask for you to please follow up when a problem is resolved.
(This post was edited by Discretesignals on Aug 25, 2011, 3:09 PM)
|
|
| |
|
Auto Repair Home
SEARCH
WHO'S 
LOG 
1989 toyota pickup 3.0 crank no start
Please Help - Knock sound & engine fail
