Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN






2000 astro quits running


Search for (search options)
 



sledbob
New User

Feb 14, 2011, 2:30 PM

Post #1 of 2 (1187 views)
2000 astro quits running Sign In

My 2000 astro will quit running for no apparent reason. Plugs, cap, rotor, wires about 20k, fuel pump 6mo old, new ignition control modal (old tested bad), only code that comes up is for the catalytic converter. doe's anyone know where I should go with this next? Problem seems to exist on days when it snows.


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Feb 14, 2011, 2:44 PM

Post #2 of 2 (1183 views)
Re: 2000 astro quits running Sign In

  All "crank, no start" conditions are approached in the same way. Every engine requires certain functions to be able to run. Some of these functions rely on specific components to work and some components are part of more than one function so it is important to see the whole picture to be able to conclude anything about what may have failed. Also, these functions can ONLY be tested during the failure. Any other time and they will simply test good because the problem isn't present at the moment.
If you approach this in any other way, you are merely guessing and that only serves to replace unnecessary parts and wastes money.



Every engine requires spark, fuel and compression to run. That's what we have to look for.

These are the basics that need to be tested and will give us the info required to isolate a cause.

1) Test for spark at the plug end of the wire using a spark tester. If none found, check for power supply on the + terminal of the coil with the key on.


2) Test for injector pulse using a small bulb called a noid light. If none found, check for power supply at one side of the injector with the key on.


3) Use a fuel pressure gauge to test for correct fuel pressure, also noticing if the pressure holds when key is shut off.

4) If all of these things check good, then you would need to do a complete compression test.

Once you have determined which of these functions has dropped out,
you will know which system is having the problem.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.







 
 
 






Search for (options) Privacy Sitemap