Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









2000 saturn sl1


Search for (search options)
 



jordantipton
New User

Feb 17, 2009, 8:38 PM

Post #1 of 3 (1996 views)
post icon 2000 saturn sl1 Sign In

I have a serious problem. My saturns service engine light was on for a month when my car started breaking down. Autozone diagnosed that it was the camshaft position sensor. I replaced the CRANKSHAFT position sensor, plugs and wires. Also i replaced the coolant temp sensor. My car still dies on me. But i did notice that when my car dies and wont start if i take off the battery wire for about a minute and then put it back on my car will start and run for a very short period. Can anyone please help me with this problem?


Loren Champlain Sr
Veteran / Moderator
Loren Champlain Sr profile image

Feb 18, 2009, 6:40 PM

Post #2 of 3 (1989 views)
Re: 2000 saturn sl1 Sign In

Jordan; Autozone strikes again! Is the check engine light still on? When you disconnect the battery, the PCM will lose it's memory and go into a 'fail safe' mode. Then, it will take a drive cycle for it to relearn perameters. It's just like rebooting your PC at home. When it fires up, it goes thru different 'checks' before you can use it. As soon as the check engine light comes on, it will store a trouble code. Have that code read and post it here and we'll see what we can come up with. Don't let them sell you any more parts until we get to the bottom of this.
Loren
SW Washington


Todd Norton
User

Feb 22, 2009, 12:30 PM

Post #3 of 3 (1982 views)
Re: 2000 saturn sl1 Sign In

Hi Jordan ...........so auto zone diagnosed the problem to be a camshaft sensor and you replaced the Crankshaft sensor Crazy, any particular reason or was that a typo ?otherwise do as Loren says and report back k seeya Todd






 
 
 






Search for (options) Privacy Sitemap