Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









Search Auto Parts

2015 dodge charger problems after rocker arm repair!!!


  Email This Post



cris314
New User

Jul 11, 2021, 12:48 PM

Post #1 of 7 (587 views)
2015 dodge charger problems after rocker arm repair!!! Sign In

2015
charger
se
3.6
120,658 miles
i changed the rocker arms and valve lifters on both heads as well as oil filter housing and the left intake camshaft. as i started it a p0300 code wanted to stall engine shakes bad but doesnt die and has low compression on driver side cylinders and all spark plugs are semi covered in oil and smell like gas and exhaust smells rich burn, checked timing and it was spot on and no bent valves either, oil pump control valve/ solenoid was bare cables, fixed it and it threw p0123,p0222,p0108,p0023,p0020,p0345,p0390 need help ive been going at it for about 3 weeks already


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Jul 11, 2021, 1:39 PM

Post #2 of 7 (576 views)
Re: 2015 dodge charger problems after rocker arm repair!!! Sign In

! What a horror show.
> What prompted this disaster in the first place if you know? One side and you say timing is spot on? Wrong parts or original problem wasn't found yet??


T



Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jul 11, 2021, 2:51 PM

Post #3 of 7 (572 views)
Re: 2015 dodge charger problems after rocker arm repair!!! Sign In

This are all sensor and actuator codes on the same side. You have to have a wiring problem. Go back and check all you wiring connectors and make sure you didn't miss one, wires pinched somewhere or a connector not locked together.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



cris314
New User

Jul 11, 2021, 4:36 PM

Post #4 of 7 (556 views)
Re: 2015 dodge charger problems after rocker arm repair!!! Sign In

Everything was fine I started on the oil filter housing first then moved to rocker arms and valve lifters, I’ve done this before to a 15’ grand caravan but all the cams on that one were fine then came this charger and I took off the timing cover to check timing and it was fine and no bent valves and I put new spark plugs too which puzzled me


cris314
New User

Jul 11, 2021, 4:41 PM

Post #5 of 7 (552 views)
Re: 2015 dodge charger problems after rocker arm repair!!! Sign In

The only wiring issue was the oil pump control valve/solenoid and once checked the connection is wasn’t secure either so I put extra wiring and crimped and slapped a lot of electrical tape and all those extra codes popped up and I’m suspecting that since the solenoid was I guess not properly connected it Sh!t these codes since these new vvt engines are crucial with their oil so I ordered a new solenoid hoping it might work but what else you think it might be? Besides the electrical because I checked it all and no pinched wires and everything is nice and grounded and connected


Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Jul 11, 2021, 4:45 PM

Post #6 of 7 (543 views)
Re: 2015 dodge charger problems after rocker arm repair!!! Sign In

OK, never mind. You're not listening anyway.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.



cris314
New User

Jul 11, 2021, 5:30 PM

Post #7 of 7 (538 views)
Re: 2015 dodge charger problems after rocker arm repair!!! Sign In

Okay, thanks.






  Email This Post
 
 


Feed Button




Search for (options) Privacy Sitemap