Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









84 dogde d350 won't stay running


Search for (search options)
 



jdub
New User

Dec 4, 2013, 10:38 AM

Post #1 of 7 (1614 views)
84 dogde d350 won't stay running Sign In

I have a 84 dodge d350 wih a 360 with edelbrock 600 cfm carb. It will start vut then dies n does t wanna start back up until it sits for awhile or hit it with starting fluid but it just dies again.. please help.


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Dec 5, 2013, 8:45 AM

Post #2 of 7 (1589 views)
Re: 84 dogde d350 won't stay running Sign In

What are you using for a fuel pump? Sure points to lack of fuel,

T



jdub
New User

Dec 5, 2013, 7:51 PM

Post #3 of 7 (1572 views)
Re: 84 dogde d350 won't stay running Sign In

A mechanical pump. Fuel pressure at carb is 6.5.


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Dec 6, 2013, 1:24 AM

Post #4 of 7 (1562 views)
Re: 84 dogde d350 won't stay running Sign In

OK - that's plenty for a carb so pump itself should be fine but still should go thru a filter on way or at carb which may be a problem. That or carb itself wont allow fuel in with some issue/problem with needle valve or whatever that carb uses.

Is choke working at all?

T



jdub
New User

Dec 6, 2013, 1:31 AM

Post #5 of 7 (1556 views)
Re: 84 dogde d350 won't stay running Sign In

Took carb off and tore it apart. It was nasty inside a couple needle vavles were sticking and for some reason the step up (metering) rods were all bent up and weren't even going into there hole locations. Havent got it back together yet waiting on parts. Will update asap... thanks for help..


Tom Greenleaf
Ultimate Carjunky / Moderator
Tom Greenleaf profile image

Dec 6, 2013, 1:52 AM

Post #6 of 7 (1555 views)
Re: 84 dogde d350 won't stay running Sign In

Yuk. IDK if you can fix bent up stuff reliably. No clue what an Edelbrock carb looks like inside. May need another entirely. Many OE carbs really stunk in model year '84 people swapped them out like wild fire for non OE stuff just to run OK not just any performance,

Good luck. Maybe that company sells parts to it that wouldn't come in the standard rebuild kit??

T



Hammer Time
Ultimate Carjunky / Moderator
Hammer Time profile image

Dec 6, 2013, 5:48 AM

Post #7 of 7 (1545 views)
Re: 84 dogde d350 won't stay running Sign In


Quote
and for some reason the step up (metering) rods were all bent up and weren't even going into there hole locations.


Who had it apart to cause that damage?



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

We offer help in answering questions, clarifying things or giving advice but we are not a substitute for an on-site inspection by a professional.







 
 
 






Search for (options) Privacy Sitemap