Main IndexAuto Repair Home Search Posts SEARCH
POSTS
Who's Online WHO'S
ONLINE
Log in LOG
IN









91 Cutlass 3.1L Knocking


Search for (search options)
 



dibs89
New User

Nov 17, 2009, 4:27 PM

Post #1 of 4 (2549 views)
91 Cutlass 3.1L Knocking Sign In

Here is the story of what has happened so far. I bought this car a few months ago with 88k. It had no problems that I could hear or see, and I have done every little thing I can to keep it running strong. A week ago I decided to act a fool. I stopped on an old highway road, put it into neutral, reved it high, threw it into drive, and took off. Immediatly I heard a low quiet thund and it had no problem getting up to 6k, but stayed there a bit too long before it shifted. I continued driving normally until I got home 10 miles later, and when I put it into park, I heard out of no where a ticking noise. It was constant, but not too loud. Probably twice per second. The next day I started it and it sounded fine idelling. I put it into reverse and started to back out, and I heard it start. It was louder than the previous night, and as I picked up speed, it grew louder and more rapidly. On that trip I noticed that I was showing low oil pressure, so I stopped at Autozone and picked up a 5Qt bottle and put 3.5quarts in with a bottle of motor honey. After 5 minutes of driving it started to quiet down, but it was still there. I didn't drive it the next few days. Then I brought it to a friends house so that we could take a look at it. When I started it up after those few days, the noise was louder, more like a knock, and there while idelling. I ran up do dollar general and grabbed a bottle of Lucus treatment, dumped it in, let it run a few minutes, and drove it to my friends house. I took off the valve cover in the front, the 6 rocker arms where nice and tight, so I took them off one at a time and looked at the push rods. None of them were scratched or bent, and all 6 of the arms were squirting out oil. Today I drove it back to my friends house, and now it is getting worse. It is taking longer to shift, and I have a loss of power. It wont shift until 3.5k no matter how lightly I am pressing on the gas. My friend and I aren't mechanics, but if we knew what the problem was, we could figure out how to fix it. I am really low on money right now, and am hoping that perhaps there are a few cheap things that I can try before I give up on it. Any input would be really appreciated.


Loren Champlain Sr
Veteran / Moderator
Loren Champlain Sr profile image

Nov 17, 2009, 6:30 PM

Post #2 of 4 (2544 views)
Re: 91 Cutlass 3.1L Knocking Sign In

>> put it into neutral, reved it high, threw it into drive, and took off. Immediatly I heard a low quiet thund and it had no problem getting up to 6k, <<
And, just why, would you do something like this? At the very least, you may have collapsed a lifter. If you are lucky. But, I've got to say, you don't deserve to be lucky.Unsure
Loren
SW Washington


dibs89
New User

Nov 17, 2009, 6:52 PM

Post #3 of 4 (2542 views)
Re: 91 Cutlass 3.1L Knocking Sign In

I know it was stupid. I was trying to impress my little brother. Not a good reason, but that's what I did and I can't take it back.


Loren Champlain Sr
Veteran / Moderator
Loren Champlain Sr profile image

Nov 17, 2009, 6:57 PM

Post #4 of 4 (2540 views)
Re: 91 Cutlass 3.1L Knocking Sign In

>> I was trying to impress my little brother<<
LOL. I'll bet he was impressed! Look, bro. "This is how you destroy an engine in three seconds flat". SmileSmileSmile
Good for you. You admitted your mistake. Takes a 'man' to do that. Good luck to you. Hopefully, it isn't too severe damage.Unsure
Loren
SW Washington






 
 
 






Search for (options) Privacy Sitemap